Carburetor Retrofit for Generac 073112B

This carb. was a perfect retro fit for my Generac model 9206-0 NP-66G. The work needing to be done was decribed perfectly in order to retrofit the carb for the application. My local generac dealer told me I would have to replace the entire generator because that carb was obsolete and they couldn't get a replacement. This saved me almost $5,000! The only differences between this carb and the OEM was that I needed to remove the butterfly valve arm and then remove the detente ball that causes this carb valve to lock open. It needed to move freely and have a spring return. I used the spring from the old carb and the drilled out the hole for the spring to set into and that worked fine. The other difference was the fuel intake angle but that was an easy fix by using flexible tubing. Once I finished the install, I fired it up and it runs like a champ!

A Note to ASAP- this carb needs to be associated with the model 9206-0 online so that searchers can find it like me. You have the only solutions I could find for my obsolete model. Thanks guys!