*Click here for an optional pulley.  Please note that the diameter is 4.5", so if that is larger than your OEM pulley,  it may require a longer belt (if there is not enough adjustment with the existing one).*

Since Quicksilver part # 46-810800 or 810800 (Generac# 070942C or 70942-C)  is no longer available, we offer this quality replacement pump as an alternative solution.  This will fit if you are able to make a simple bracket from a flat piece of steel.

See the above picture that one of our customers sent us to show his replacement pump set-up. *You will need to provide the "adapter bracket," and your own pulley. You get the pump. The other parts probably can be pulled off the old pump or purchased elsewhere.

The adapter to fabricate is simply a small flat piece of sturdy steel that you drill holes in to match the original bracket to the new pump, and then allows the new pulley to line up with the existing belt & drive pulley.  It is a little extra work but if it saves you from buying a new generator, it is a good deal!

For replacement Impeller kit click here.

• Part #: 70942-A