Governor Speed Control for Barber Colman, Woodward, Cummins

Our model ESC2301-A universal 15 amp electronic governor controller replaces many part numbers for Barber Colman, Woodward, Cummins, Onan, and many others!  This design works on 12V OR 24V battery systems and with multiple frequency ranges from all types of flywheel sizes and teeth counts! Click here for manual.

For newer replacement with broader application and better adjustability, CLICK this link to see our new ESC3500 series!

Features idle control, smoke limiting, ramp time, multiple MPU frequency input ranges, and much more!

Compatible with most analog type governor controllers from Cummins, Barber Colman, Woodward and GAC. Actuators can be hydraulic type, built in type, and external mounted types, and the actuator resistance range is 1.6 ohm to 48 ohms on 24 volt operation, and 0.8 ohm to 24 ohms on 12 volt operation.

Please do not order this for any 2 cycle Detroit Diesel application! They do not seem to work well for those. Consider the ESC3500, EEG6500 or ESD5500E. Contact tech support if any doubt!

Can replace all of the following and many more:

DYN1 10752-000-0-12 / 24 250 to 1200 Hz   (The ESC2301-A starts at 600 Hz)
DYN1 10753-000-0-12 / 24 1200 to 2500 Hz
DYN1 10754-000-0-12 / 24 2500 to 5000 Hz
DYN1 10756-000-0-12 / 24 5000 to 9500 Hz
DYN1 10752-001-0-12 / 24 250 to 1200 Hz   (The ESC2301-A starts at 600 Hz)
DYN1 10753-001-0-12 / 24 1200 to 2500 Hz
DYN1 10754-001-0-12 / 24 2500 to 5000 Hz
DYN1 10756-001-0-12 / 24 5000 to 9500 Hz

DYN1 10684-000-0-12 / 24
DYN1 10693-001-0-12 / 24  1200 to 2500 Hz
DYN1 10693-002-0-12 / 24  1200 to 2500 Hz
DYN1 10694-001-0-12 / 24  2500 to 5000 Hz
DYN1 10694-002-0-12 / 24  2500 to 5000 Hz
DYN1 10695-000-0-12 / 24  2500 to 5000 Hz

The ESC2301-A speed control can be used with these rotary actuators and most others:

DYNC 50000-000-0-12 or DYNC 50000-000-0-24

For even more functions and adjustability, see our new ESC3500 series!

• Part #: ESC2301-A