Rheostat for Voltage regulator, 1k ohm, 1 watt POT

This 1k (1000 ohms) 1 watt pot is for remote adjustment of several AVR's that we sell.  It is not required, but is primarily used for mobile or rental generators used for different voltages.  The shaft can be adjusted with a straight screwdriver.

This will need to have 2 wires soldered into the terminals.  One of the wires will need to be soldered to the center terminal of the pot, and the other wire can be soldered to either of the remaining terminals.  If the voltage adjustment is "backwards", simply switch the wire to the opposite terminal.

This will fit our AVR's listed belaw, and possibly some others*

• VR460
• VR634B-A
• VR648
• VR350
• VR6415
• VR1808FW
• VR230
• VR448
• VRSE50HW
• VRSE50FW
• ADVR125-7F

 * Consult your manual to be sure this is right for other applications.

• Part #: RV24YN20SB102
• 5 In Stock