loader

Dynagen

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

Part #: RLY0054
$9.50
You will need 3 of these to change your TG or GSC series controllers to 24 volt operation. 24V Cube Relay RLY0054 replaces:  Part # RLY0043 Part # AZ9731C24DC3E more info
ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

Part #: 02022-00
$17.04
NPTF Temp Sender. 280F, 1/8" - 27 NPTF Fits all Dynagen controllers with digital display.   more info
Basic Harness for GSC400

Basic Harness for GSC400

Part #: ACC0086
$63.55
8ft Harness Starter Kit (AC Current Sensing, Digital Input, and Analog Input Cables) for the GSC400 more info
Current Transformers, 50:5 Amp CT

Current Transformers, 50:5 Amp CT

Part #: AL500
CT Donut 1" 50:5 for 50 amp This item is no longer available, you can see other options here . more info
DWG1454, Cable for RA400 & WS100, (RS485) Dynagen

DWG1454, Cable for RA400 & WS100, (RS485) Dynagen

Part #: DWG1454
$49.77
5' pigtail harness for Modbus connection for the GSC400 Click here for wiring diagram. Please note before ordering this part:  The GSC400 has been in production for approximately 13... more info
DWG1475, Main I/O Starter Harness for Relay Pack (3 SW IN, 3 SW

DWG1475, Main I/O Starter Harness for Relay Pack (3 SW IN, 3 SW

Part #: DWG1475
$27.53
For applications that utlize the RP100-VM RelayPak option.   - 3 SW In - 3 SW OUT - 3 Sensors - Power - 4' more info
DWG1478, Magnetic Pickup/J1939 Interface Harness

DWG1478, Magnetic Pickup/J1939 Interface Harness

Part #: DWG1478
$16.94
If you are using this harness with J1939 application (eg. Engine ECM or electronic governor) or CANBUS, you will need to use 2) 120 OHm resistors:  one at the dynagen control and one at the... more info
DWG1479, 3-Phase AC Volts Harness (Gen or Mains)

DWG1479, 3-Phase AC Volts Harness (Gen or Mains)

Part #: DWG1479
$15.89
4 foot May also be known as DWG1479R1.0 more info
DWG1518, Harness, AC Current Sensing, TG Series

DWG1518, Harness, AC Current Sensing, TG Series

Part #: DWG1518
$15.89
3 Phase AC Current Harness for the TG410 4' more info
DWG1565, TG/TE Pro J1 Harness, Dynagen

DWG1565, TG/TE Pro J1 Harness, Dynagen

Part #: DWG1565
$155.99
DWG1565, TG/TE Pro J1 Harness, Dynagen;  Fully populated J1 Harness, all I/O present. more info
DWG1576 Harness for TL3600, Dynagen

DWG1576 Harness for TL3600, Dynagen

Part #: DWG1576
$148.35
Dynagen DWG1576 Harness for TL3600 TOUGH Link 2 foot Harness with Mating connector to 6 PIN Deutsch Connector DT04-6P more info
Dynagen ACC0045, Current Transformer 100:5 Amp

Dynagen ACC0045, Current Transformer 100:5 Amp

Part #: ACC0045
Current Transformer, 10KV, 100A:5A If out of stock see other options here more info
Due to price and availability issues, we are substituting the same OEM CT without the Dynagen brand-name:Click here for possible replacement
Dynagen ACC0046, Current Transformer 200:5 Amp

Dynagen ACC0046, Current Transformer 200:5 Amp

Part #: ACC0046
Dynagen 200A:5A Current Transformer Can replace # 2RL201 If out of stock see other options here more info
Due to price and availability issues, we are substituting the same OEM current transformer without the Dynagen brand-name:Click here for possible replacement
Dynagen ACC0047, Current Transformer 300:5 Amp

Dynagen ACC0047, Current Transformer 300:5 Amp

Part #: ACC0047
$32.83
Dynagen 300A:5A Current Transformer If out of stock, see other options here more info
Dynagen ACC0048, Current Transformer 500:5 Amp

Dynagen ACC0048, Current Transformer 500:5 Amp

Part #: ACC0048
Dynagen 500A:5A Current Transformer Has approx 1.1" opening in the center.  If out of stock, see other options here more info
Due to price and availability issues, we are substituting the same OEM current transformer without the Dynagen brand-name:Click here for possible replacement
Dynagen ACC0049, Current Transformer 600:5 Amp

Dynagen ACC0049, Current Transformer 600:5 Amp

Part #: ACC0049
$32.83
Dynagen 600A:5A Current Transformer If out of stock, see options options here more info
Dynagen ACC0050, Current Transformer 1000:5 Amp

Dynagen ACC0050, Current Transformer 1000:5 Amp

Part #: ACC0050
Dynagen CT, 1000A:5A, 1.5" Hole more info
Due to price and availability issues, we are substituting the same OEM current transformer without the Dynagen brand-name:Click here for possible replacement
Dynagen ACC0099, Temp. Sender, Datcon 02025-00, 1/2"NPT

Dynagen ACC0099, Temp. Sender, Datcon 02025-00, 1/2"NPT

Part #: 02025-00
$28.42
Dynagen ACC0099 / Datcon 02025-00, Temperature Sender Specs:  140-320 degrees F, 1/2 " National Pipe Threads  more info
Dynagen DWG1373, J1939 Cable for GSC400, 5 ft.

Dynagen DWG1373, J1939 Cable for GSC400, 5 ft.

Part #: DWG1373
$32.83
5' CANbus harness for the GSC400 Click here for wiring diagram. more info
Dynagen DWG1377, Digital Output Cable 5ft

Dynagen DWG1377, Digital Output Cable 5ft

Part #: DWG1377
$38.12
5' SW Output Harness for the GSC400 Click here for wiring diagram. more info
Dynagen DWG1410, Pre-Crimped Wires, 5'

Dynagen DWG1410, Pre-Crimped Wires, 5'

Part #: DWG1410
$32.83
Extra Pre-Crimped Wires Package of 5 5 foot length more info
Dynagen DWG1476, TG Main I/O Starter Harness

Dynagen DWG1476, TG Main I/O Starter Harness

Part #: DWG1476
$24.36
To be used in applications  not  utlizing the RP100-VM RelayPak option. 3 SW IN, 3 SW OUT, 3 Sensors - 4' more info
Dynagen DWG1477, TG Advanced IO Harness

Dynagen DWG1477, TG Advanced IO Harness

Part #: DWG1477
$18.00
 2 SW IN, 3 SW OUT, 1 Universal Sensor, 4' more info
Dynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus

Dynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus

Part #: DWG1522
$27.53
Mag / CANbus / Modbus Harness for the Dynagen TG Series, 4 foot  Note:  This harness comes with quantity 2) 120 Ohm loose resistors. However, we have an option that is easier to install, in... more info
DynaGen ES52 Auto Start Module for Generator, Engine

DynaGen ES52 Auto Start Module for Generator, Engine

Part #: ES52-12-A-LS
This is the best automatic engine control of it's kind for generators, pumps, or other unattended engine applications. Attn: Dealers, generator repair shops, & volume users - contact us for... more info
Dynagen ES53 Control

Dynagen ES53 Control

Part #: ES53
The ES53 is no longer available from Dynagen.  If you need a replacement part, please contact us   for other possible options.  ES53 User Manual more info
Dynagen GSC101-L-12 Board , Powermate CP200 (026-0534)

Dynagen GSC101-L-12 Board , Powermate CP200 (026-0534)

Part #: GSC101-L-12
NOTE:  This part is no longer available!  However, you can use the GSC-102 shown here . Older versions of this board may also be marked GSC1-12 DynaGen GSC101-L-12 engine control has GSC1... more info
Dynagen GSC400 Plus Controller for Generator & KPC-1000

Dynagen GSC400 Plus Controller for Generator & KPC-1000

Part #: GSC400-0-12-LSC
The GSC400 has been in production for approximately 13 years, and has been great product to this day. However, because of advances in technology and newer electronic engines, Dynagen has... more info
Dynagen SWT0038, Milbank ATS Contactor Assy, 100A, 2 Pole

Dynagen SWT0038, Milbank ATS Contactor Assy, 100A, 2 Pole

Part #: Z1176255
$409.00
This quality original equipment 100 amp contactor can be used in Dynagen and Milbank Vigilant 100A automatic transfer switches.  Milbank part # Z1176255.   Made in Japan. This is also an... more info
Dynagen VTSC100-240-12-X Control PCB, Milbank Z1157780

Dynagen VTSC100-240-12-X Control PCB, Milbank Z1157780

Part #: VTSC100-240-12-X
News Flash! We can now have these boards repaired in most cases!  We recommend sending us a photo of front & back sides before sending it in. New control board for Dynagen, Milbank and Ronk... more info
ENC0080, Enclosure, Dynagen TG Series 8x8x4"

ENC0080, Enclosure, Dynagen TG Series 8x8x4"

Part #: ENC0080
$104.83
NEMA 1 Steel Encolsure with vibration mounts more info