Advanced Service And Parts LLC [home link]
0
1.800.630.1230
English & Espaol (Spanish)!

Dynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus

$25.97

1501
  • Part #: DWG1522
  • 17 Units in Stock

  • Part #: DWG1522
  • 17 Units in Stock
  • Manufactured by: Dynagen
Manufactured by: Dynagen Product ID: 1501 $25.97New



You might also like...

ENC0080, Enclosure, Dynagen TG Series 8x8x4"

ENC0080, Enclosure, Dynagen TG Series 8x8x4"
NEMA 1 Steel Encolsure with vibration mounts
$98.90

24 Volt Relay # RLY0017 for ES52 and ES51 Dynagen Control

24 Volt Relay # RLY0017 for ES52 and ES51 Dynagen Control
These heavy-duty 24VDC relays must be installed in the Dynagen ES51 or ES52 series engine controller for 24V DC engines or generators.  This is Dynagen Accessory # RLY0017. YOU MUST BUY TWO to...
$8.99


24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers
You will need 3 of these to change your TG or GSC series controllers to 24 volt operation. Replaces part # RLY0043
$8.99

Basic Harness for GSC400

Basic Harness for GSC400
5ft Harness Starter Kit (AC Current Sensing, Digital Input, and Analog Input Cables)
$55.94

200A:5A Current Transformer

200A:5A Current Transformer
If out of stock see other options here
$24.95

Snap-on RelayPak Option, Dynagen

Snap-on RelayPak Option, Dynagen
Snap-on RelayPak Option The RelayPak is socketed to accept four industry standard cube relays. When installed, the RelayPak (RP-100*) eliminates the need to mount and wire external slave relays for...
$42.96

12 Volt Relay # RLY0013 for ES52 and ES51 Dynagen Control

12 Volt Relay # RLY0013 for ES52 and ES51 Dynagen Control
These heavy-duty 12VDC relays must be installed in the Dynagen ES51 or ES52 series engine controller for 12V DC engines or generators.  This is Dynagen Accessory # RLY0013.
$4.99


Dynagen DWG1477, Advanced IO Harness

Dynagen DWG1477, Advanced IO Harness
 2 SW IN, 3 SW OUT, 1 Universal Sensor
$16.98

Dynagen ACC0046, Current Transformer 200:5 Amp

Dynagen ACC0046, Current Transformer 200:5 Amp
Dynagen 200A:5A Current Transformer If out of stock see other options here
$29.97

TG410 TOUGH Series Digital Genset Control, DynaGen

TG410 TOUGH Series Digital Genset Control, DynaGen
Tough Series - For engines or generators The TOUGH series controllers are designed to provide complete control, protection and engine instrumentation for both standard and electronic CAN Bus engines...
$499.00  $409.95
Save: 18% off


ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen
NPTF Temp Sender. 280F, 1/8" - 27 NPTF Fits all Dynagen controllers with digital display.  
$16.49

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410
We are now substituting this part to the ACC0108-A which has the same specs.  This may no longer be readily available on the shelf.  If you still require this part, there will be a lead...
$77.92


Dynagen ACC0047, Current Transformer 300:5 Amp

Dynagen ACC0047, Current Transformer 300:5 Amp
Dynagen 300A:5A Current Transformer If out of stock, see other options here
$30.97

TG350 TOUGH Series Digital Genset Control, Dynagen

TG350 TOUGH Series Digital Genset Control, Dynagen
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our...
$389.00  $319.00
Save: 18% off

RA400-LS, Rmt Annun RA-400 for GSC400 and TG410

RA400-LS, Rmt Annun RA-400 for GSC400 and TG410
RA400 User Manual Data Sheet Suggested Accessories: The enclosure will not be included, order ACC0109 If using with the TG410, order DWG1522 If using with the GSC400, order DWG1454R1.4 If...
$541.46

ACC0109, Enclosure for RA-400

ACC0109, Enclosure for RA-400
8x8x4 Metal Enclosure for RA400
$39.95


Dynagen ACC0045, Current Transformer 100:5 Amp

Dynagen ACC0045, Current Transformer 100:5 Amp
Current Transformer, 10KV, 100A:5A If out of stock see other options here
$29.97

ACC0108-A, Oil Sender Replacement for Dynagen

ACC0108-A, Oil Sender Replacement for Dynagen
 Compatable with all Dynagen controllers that use an oil sender to display oil pressure on the digital panel ( GSC300, GSC400, TG350 & TG410).  Rated 0-100 psi. Suitable...
$39.98

3/8" UNF Magnetic Pickup / Speed Sensor for Generator

3/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 3/8" fine threads, 2.5" long. Has 6 foot shielded cable attached. *Replaces the following: Barber Colman DYNT-17200 Generac 82130D / 0 82130D Kohler...
$64.95

6188000 Din Mount Kit for Time Switches

6188000 Din Mount Kit for Time Switches
6188000 Din Mount Kit for Time Switch.  Fits the following Clocks: TA0016 TA0019 TA0005 TA4353 The below image is what this part looks like when it is installed to a Exercise Clock:
$14.95


ACC0013 Time Switch, Exercise Clock, 12VDC SPST

ACC0013 Time Switch, Exercise Clock, 12VDC SPST
TA0005 Exercise Clock Time Switch, 12VDC SPST Recommended Din Mount Kit: 6188000 Din Mount Kit for Time Switches   The below image is what this part looks like with that Din Mount Kit installed:
$89.95

Sender, 280F, M14x1.5 threads, for Dynagen etc.

Sender, 280F, M14x1.5 threads, for Dynagen etc.
This temperature sender is compatible with Dynagen TG410, TG350, GSC300, and GSC400. High Range Temperature Sender 100-280F and 140-320F   M14x1.5 Metric threads
$20.60

Governors America"GAC" ESD2244-24 Control, 24V

Governors America"GAC" ESD2244-24 Control, 24V
This is a new 24VDC governor control capable of running actuators on a constant speed engine or generator set. Compatible with Woodward and Barber Colman actuators mpounted on top of Stanadyne...
$310.00  $279.95
Save: 10% off


Netbiter EC150 Remote Monitor for Generators & Equipment

Netbiter EC150 Remote Monitor for Generators & Equipment
Excellent to monitor your Generator when used with Dynagen TG350, TG410, and GSC400! The Netbiter EC150 communication gateway connects to field equipment via several connection methods: Serial...
$629.00

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our PC...
$424.00

DWG1454, Cable for RA400 & WS100, (RS485) Dynagen

DWG1454, Cable for RA400 & WS100, (RS485) Dynagen
5' pigtail harness for Modbus connection for the GSC400 Click here for wiring diagram.
$46.95

3034572-A 5/8" Mag Pickup, Cummins Type

3034572-A 5/8" Mag Pickup, Cummins Type
Replacement 5/8" Mag Pickup for Cummins 3034572
$44.95


Model GSC400-PGMR Dynagen (Programmer Kit for GSC400)

Model GSC400-PGMR Dynagen (Programmer Kit for GSC400)
This is the software & cable kit to program the GSC400 series with your laptop or any compatible PC. Please note:  As the GSC400 is being replaced by the TG410 due to advancements in...
$195.00

Dynagen DWG1410, Pre-Crimped Wires, 5"

Dynagen DWG1410, Pre-Crimped Wires, 5"
Extra Pre-Crimped Wires Package of 5 5 foot length
$30.97

Dynagen GSC400 Plus Controller for Generator & KPC-1000

Dynagen GSC400 Plus Controller for Generator & KPC-1000
Please note before ordering this part:  The GSC400 has been in production for approximately 13 years, and is a great product to this day. However, because of advances in technology and newer...
$556.44

Dynagen DWG1373, J1939 Cable for GSC400, 5 ft.

Dynagen DWG1373, J1939 Cable for GSC400, 5 ft.
5' CANbus harness for the GSC400 Click here for wiring diagram.
$30.97


Copyright © 2019 Advanced Service And Parts LLC (A.S.A.P). Powered by Zen Cart | Custom Zen Cart work by ZenExpert