QuickSilver QS-4.0G, 5.0G, 6.5G, 7.5G, 8.0G, and 10.0G Generac

Replaces Quick Silver 811513 more info

Generac Exhaust Flange 070915 or 70915A replaces Quicksilver 810594. Note that 70914 is the # on the actual metal casting. Exhaust flange gasket 070922, and o-ring gasket for... more info

Aftermarket Oil Filter for Quicksilver # 35-810144 and Generac # G075755 (075755 / 75755)  more info

Generac p/n 71908 replaces Quicksilver p/n 810620. more info

Generac 024044A00A Brush Notice: If you need qty (2), you much purchase qty (2). These brushes do not come in a pack of two; they have to be purchased per each. Replaces: A24044A A-24044-A... more info

Generac G070941 now replaces 70941 and 070941 and Quicksilver 35-811052.     Height: 5.880 Outer Diameter: 4.500 Inner Diameter Top: Closed Inner Diameter Bottom: ... more info

Generac 023877D Brush Holder (Holds two 024044A00A brushes - purchase seperately). Replaces Quick silver 810540 and Generac 23877D. more info

Ignition points for Generac & Quick silver generator with Nissan 1.0L and 1.2L 4 cylinder gas engines. Quality after-market equal contact set replaces the following part numbers: Generac... more info

Distributor Cap for Generac & Quick silver generator with Nissan 1.0L and 1.2L 4 cylinder gas engines. Quality after-market equal cap replaces the following part numbers: Generac 315-69828... more info

Fuel Filter, aftermarket replacement for Generac 074016 Fits some Generac RV and QuickSilver gasoline generators.  Usually screws into carburetor.  Be careful not to... more info

Aftermarket replacement part is the same style as OEM brand.  Replaces Mercruiser / Quicksilver 811508 Fuel Pump , Generac # 74024 and 074024  (12V Electric)  1/8" NPT Notes: The... more info

Exhaust Outlet replaces 70917 and 070917 for Generac / Quicksilver Generators NOTE:  This part also has the number 70916 on the body; but this is only a "casting" number, not to be... more info

G0709650133 SPRING-TENSIONER more info

Generac 70943 Gasket  - use with Generc 69853 Impeller (Quicksilver 47-810567)  Fits backplate # 70948.   more info

Generac G070948 Back Plate fits Quick silver marine generator raw water pump. (The following parts are recommened to be used when this plate is replaced) Screws 80824 -  Order 6 Gasket 70943... more info

Generac 72561 CAM for Quicksilver SEAWATER PUMP Same as Quick Silver part # 810578. more info

Generac 80824 Stainless Steel Screw for back plate 70948 - requires (6) Same as Quicksilver part # 10-816476. more info

Fits Generac generators: RV, portable , Guardian home standby, Quicksilver  Mercruiser marine generators. Replaces Part numbers: 74074 83048 083048 0830480SRV SRV83048 83048GS 810676... more info

Description: Generac & Guardian RV & Quicksilver Marine Control Board (New genuine part) Replaces Part numbers: 93642 093642 0936420SRV SRV93642 70325 70325G 810658 (Quick silver part... more info

Fuel Pump, 069857, AC/Delco, Generac fits Quicksilver generator etc. CAUTION: Be sure you are buying the correct pump!  This is an AC / Delco pump.  Most have THIS style instead: Fuel Pump... more info

Genuine Generac G075755 Oil Filter fits Nissan 1.0L & 1.2L engines on Generac & Quicksilver generators. Aftermarket option available here .  Replaces these older part #'s 35-810144... more info

After-market ignition rotor for industrial / marine Nissan 1.0L and 1.2L engines used by Generac & Quick Silver. Replaces the following numbers: Generac 0698280314 Generac 314 -69828 ... more info

This Generac part # 035606 switch / sensor signals the generator to shut down on high coolant temperature.  Fits some Generac and Quicksilver generators.  The Quicksilver part # is 810497.... more info

Genuine Generac G069853 Impeller for Quicksilver Marine Generators Newest original genuine part replaces these older part #'s: Generac 69853 Generac 069853 Quicksilver 47-810567 National Item... more info

Tune-up kit for Generac 1.0L and 1.2L engines, also used on Quicksilver marine generators.  This kit is Genuine Generac, not aftermarket.  We have these after-market - sold individually at... more info

The original  070976 is obsolete, but we have this "exact size" replacement galvinized nipple. more info

BRAND NEW CARBURETOR for QUICKSILVER marine generators and GENERAC generators with Nissan  engine. Carb has teflon shaft for long life.   Generac # 72576 (12V) fuel Solenoid included and... more info

12 volt fuel shut-off solenoid for Quicksilver / Generac generator with Quicksilver 1347-810641 / Generac Carburetor # 72530 / 83906. Screws into carburetor. more info

New aftermarket timing and water pump belt made by Gates in Europe to fit some Nissan engines used on Generac and Quick Silver generators.   STOP!! Click this link first,  0709650135 belt... more info

Carburetor repair kit for Quicksilver 1347-810641 / Generac Carburetor # 72530 / 83906 includes Gaskets, needle & seat and throttle shaft , plus misc small parts. Float is not included. NOTE:... more info

Replaces Quicksilver# 810087 or 57-810087 (Generac# 0698280187 or 187-69828) Square Cog, Timing Belt This belt has 91 teeth.  Be sure your water pump pulley has "square teeth" -... more info

New AFTERMARKET Replacement For Generac 0709650146 (146-70965) water pump for QS series.  Gasoline generator engine - comes with mounting gasket. Quicksilver Gas parts book - Click here:... more info

*This now comes pre-assembled with the pulley! Since Quicksilver part # 46-810800 or 810800 (Generac# 070942C or 70942-C)  is no longer available, we offer this quality replacement pump as an... more info