Your cart is empty.
The DynaGen™ TOUGH Series™ PRO TE600 and TG600 are autostart or manual digital controllers designed for complete control, protection, and engine instrumentation on mechanical or electronic engines. For use in extreme environments.
**The original release was the TE600. We supply the latest revision, the TE600A, which has an improved circuit board.
Note: The TE600A is optimized for engines used on pumps, compressors, line shafts etc.
If we are sold out of the TE600A, please refer to the TG600A. They are nearly identical - the only difference is the rabbit and turtle symbols on the buttons in the upper, right-hand corner. We can supply the rabbit and turtle button inserts at no extra charge if you wish. Feel free to contact us with any questions.
Supports all major diesel engines including mechanical Tier III, Tier IV Interim and Tier IV Final
Easily configured using the front panel buttons or RapidCore™ configurator software
Tier 4F and Euro Stage V compliant. Call factory for specific engine types
Support for spark ignition engines across most brands
Able to withstand light pressure washing at 1200 psi at 1 foot away
Sunlight readable color display
Five-year or 17,500 hour warranty
For remote annunciation, use RA400-LS. The enclosure for it is not included, that would be ACC0109
1/8" Oil pressure sender, order any of these two options, Click here.
1/8" Temp Sender order 02022-00, 1/4" order 02023-00, 3/8" order 02024-00, 1/2" order 02025-00
You will need to know the output Amps of the unit in order to chose the correct current transformers (CT) below. If you do not know the amps of the unit, here is how you can figure it out:
Note: if your unit shows "KW" then multiply KW by 1000 to get Watts (KW x 1000 = Watts)
For single Phase units: Watts / Volts = Amps | Order Qty (2)
For three phase units: Watts / Volts / 1.73 = Amps | Order Qty (3)
Round up to the nearest CT size
50 amp CT, 75 amp CT, 100 amp CT, 150 amp CT, 200 amp CT, 300 amp CT, 400 amp CT, 500 amp CT, 600 amp CT, 800 amp CT, 1000 amp CT
Optional Emergency Stop Switch - for 5A-10A, order ACC75105-2NC. For up to 20A, order ACC87941.
There are currently no product reviews.