loader
Close
717.274.9396
0 Shopping Cart$0.00
Close

Order Summary

Recently added items:

Item
Qty
Price

Your cart is empty.

Cattron

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

Part #: RLY0054
$9.84
You will need 3 of these to change your TG or GSC series controllers to 24 volt operation. 24V Cube Relay RLY0054 replaces:  Part # RLY0043 Part # AZ9731C24DC3E more info
ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

Part #: 02022-00
$17.04
NPTF Temp Sender. 280F, 1/8" - 27 NPTF Fits all Dynagen controllers with digital display.   more info
Basic Harness for GSC400

Basic Harness for GSC400

Part #: ACC0086
$78.11
8ft Harness Starter Kit (AC Current Sensing, Digital Input, and Analog Input Cables) for the GSC400 more info
Current Transformers, 50:5 Amp CT

Current Transformers, 50:5 Amp CT

Part #: AL500
CT Donut 1" 50:5 for 50 amp This item is no longer available, you can see other options here . more info
DWG1454, Cable for RA400 & WS100, (RS485) Dynagen

DWG1454, Cable for RA400 & WS100, (RS485) Dynagen

Part #: DWG1454
5' pigtail harness for Modbus connection for the GSC400 Click here for wiring diagram. Please note before ordering this part:  The GSC400 has been in production for approximately 13... more info
DWG1475, Main I/O Starter Harness for Relay Pack (3 SW IN, 3 SW

DWG1475, Main I/O Starter Harness for Relay Pack (3 SW IN, 3 SW

Part #: DWG1475
$34.99
For applications that utlize the RP100-VM RelayPak option.   - 3 SW In - 3 SW OUT - 3 Sensors - Power - 4' more info
DWG1478, Magnetic Pickup/J1939 Interface Harness

DWG1478, Magnetic Pickup/J1939 Interface Harness

Part #: DWG1478
$21.87
If you are using this harness with J1939 application (eg. Engine ECM or electronic governor) or CANBUS, you will need to use 2) 120 OHm resistors:  one at the dynagen control and one at the... more info
DWG1479, 3-Phase AC Volts Harness (Gen or Mains)

DWG1479, 3-Phase AC Volts Harness (Gen or Mains)

Part #: DWG1479
$20.41
4 foot May also be known as DWG1479R1.0 more info
DWG1518, Harness, AC Current Sensing, TG SeriesDWG1518, Harness, AC Current Sensing, TG Series

DWG1518, Harness, AC Current Sensing, TG Series

Part #: DWG1518
$20.41
3 Phase AC Current Harness for the TG410 4' more info
DWG1565, TG/TE Pro J1 Harness, Dynagen

DWG1565, TG/TE Pro J1 Harness, Dynagen

Part #: DWG1565
$141.43
DWG1565, TG/TE Pro J1 Harness, Dynagen;  Fully populated J1 Harness, all I/O present. more info
DWG1576 Harness for TL3600, Dynagen

DWG1576 Harness for TL3600, Dynagen

Part #: DWG1576
$148.35
Dynagen DWG1576 Harness for TL3600 TOUGH Link 2 foot Harness with Mating connector to 6 PIN Deutsch Connector DT04-6P more info
Dynagen ACC0045, Current Transformer 100:5 Amp

Dynagen ACC0045, Current Transformer 100:5 Amp

Part #: ACC0045
Current Transformer, 10KV, 100A:5A If out of stock see other options here more info
Due to price and availability issues, we are substituting the same OEM CT without the Dynagen brand-name:Click here for possible replacement
Dynagen ACC0046, Current Transformer 200:5 Amp

Dynagen ACC0046, Current Transformer 200:5 Amp

Part #: ACC0046
Dynagen 200A:5A Current Transformer Can replace # 2RL201 If out of stock see other options here more info
Due to price and availability issues, we are substituting the same OEM current transformer without the Dynagen brand-name:Click here for possible replacement
Dynagen ACC0047, Current Transformer 300:5 Amp

Dynagen ACC0047, Current Transformer 300:5 Amp

Part #: ACC0047
$44.63
Dynagen 300A:5A Current Transformer If out of stock, see other options here more info
Dynagen ACC0048, Current Transformer 500:5 Amp

Dynagen ACC0048, Current Transformer 500:5 Amp

Part #: ACC0048
Dynagen 500A:5A Current Transformer Has approx 1.1" opening in the center.  If out of stock, see other options here more info
Due to price and availability issues, we are substituting the same OEM current transformer without the Dynagen brand-name:Click here for possible replacement
Dynagen ACC0049, Current Transformer 600:5 Amp

Dynagen ACC0049, Current Transformer 600:5 Amp

Part #: ACC0049
$44.63
Dynagen 600A:5A Current Transformer If out of stock, see options options here more info
Dynagen ACC0050, Current Transformer 1000:5 Amp

Dynagen ACC0050, Current Transformer 1000:5 Amp

Part #: ACC0050
Dynagen CT, 1000A:5A, 1.5" Hole more info
Due to price and availability issues, we are substituting the same OEM current transformer without the Dynagen brand-name:Click here for possible replacement
Dynagen ACC0099, Temp. Sender, Datcon 02025-00, 1/2"NPT

Dynagen ACC0099, Temp. Sender, Datcon 02025-00, 1/2"NPT

Part #: 02025-00
$28.42
Dynagen ACC0099 / Datcon 02025-00, Temperature Sender Specs:  140-320 degrees F, 1/2 " National Pipe Threads  more info
Dynagen DWG1373, J1939 Cable for GSC400, 5 ft.

Dynagen DWG1373, J1939 Cable for GSC400, 5 ft.

Part #: DWG1373
$32.83
5' CANbus harness for the GSC400 Click here for wiring diagram. more info
Dynagen DWG1377, Digital Output Cable 5ft

Dynagen DWG1377, Digital Output Cable 5ft

Part #: DWG1377
$38.12
5' SW Output Harness for the GSC400 Click here for wiring diagram. more info
Dynagen DWG1410, Pre-Crimped Wires, 5'

Dynagen DWG1410, Pre-Crimped Wires, 5'

Part #: DWG1410
$39.37
Extra Pre-Crimped Wires Package of 5 5 foot length more info
Dynagen DWG1476, TG Main I/O Starter Harness

Dynagen DWG1476, TG Main I/O Starter Harness

Part #: DWG1476
$32.08
To be used in applications  not  utlizing the RP100-VM RelayPak option. 3 SW IN, 3 SW OUT, 3 Sensors - 4' more info
Dynagen DWG1477, TG Advanced IO Harness

Dynagen DWG1477, TG Advanced IO Harness

Part #: DWG1477
$23.33
 2 SW IN, 3 SW OUT, 1 Universal Sensor, 4' more info
Dynagen DWG1522, 4' J1939 TG Mag/CANbus/ModbusDynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus

Dynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus

Part #: DWG1522
$34.99
Mag / CANbus / Modbus Harness for the Dynagen TG Series, 4 foot  Note:  This harness comes with quantity 2) 120 Ohm loose resistors. However, we have an option that is easier to install, in... more info
DynaGen ES52 Auto Start Module for Generator, Engine

DynaGen ES52 Auto Start Module for Generator, Engine

Part #: ES52-12-A-LS
$280.67
This is the best automatic engine control of it's kind for generators, pumps, or other unattended engine applications. Attn: Dealers, generator repair shops, & volume users - contact us for... more info
Dynagen ES53 Control

Dynagen ES53 Control

Part #: ES53
The ES53 is no longer available from Dynagen.  If you need a replacement part, please contact us   for other possible options.  ES53 User Manual more info
Dynagen GSC101-L-12 Board , Powermate CP200 (026-0534)

Dynagen GSC101-L-12 Board , Powermate CP200 (026-0534)

Part #: GSC101-L-12
NOTE:  This part is no longer available!  However, you can use the GSC-102 shown here . Older versions of this board may also be marked GSC1-12 DynaGen GSC101-L-12 engine control has GSC1... more info
Dynagen GSC400 Plus Controller for Generator & KPC-1000

Dynagen GSC400 Plus Controller for Generator & KPC-1000

Part #: GSC400-0-12-LSC
The GSC400 has been in production for approximately 13 years, and has been great product to this day. However, because of advances in technology and newer electronic engines, Dynagen has... more info
Dynagen SWT0038, Milbank ATS Contactor Assy, 100A, 2 Pole

Dynagen SWT0038, Milbank ATS Contactor Assy, 100A, 2 Pole

Part #: Z1176255
$409.00
This quality original equipment 100 amp contactor can be used in Dynagen and Milbank Vigilant 100A automatic transfer switches.  Milbank part # Z1176255.   Made in Japan. This is also an... more info
Dynagen VTSC100-240-12-X Control PCB, Milbank Z1157780

Dynagen VTSC100-240-12-X Control PCB, Milbank Z1157780

Part #: VTSC100-240-12-X
News Flash! We can now have these boards repaired in many cases!  We recommend sending us a photo of front & back sides before sending it in. New genuine control board for Dynagen, Milbank,... more info
ENC0080, Enclosure, Dynagen TG Series 8x8x4"

ENC0080, Enclosure, Dynagen TG Series 8x8x4"

Part #: ENC0080
$121.11
NEMA 1 Steel Enclosure with vibration mounts more info
ENC0084, Enclosure, Dynagen TG Series 11.5x11.5x8.5"

ENC0084, Enclosure, Dynagen TG Series 11.5x11.5x8.5"

Part #: ENC0084
$149.95
Enclosure does not include controller NEMA 1 Steel Encolsure with vibration mounts 11.5 x 11.5 x 8.5 inches more info
GSC2-12 Dynagen Engine Control, GSC-102

GSC2-12 Dynagen Engine Control, GSC-102

Part #: GSC102
The recommended replacement is the ES52.  However, this is not a drop-in replacement, and will need some re-wiring to make it work.  Tech support is available.  This 12 volt control... more info
GSC300 Auto Start Engine Control Module for Generators, Engines

GSC300 Auto Start Engine Control Module for Generators, Engines

Part #: GSC300-L-12-LS
$398.00
These are no longer in production, but we may have access to limited stock.  Please contact us before making purchase! Computer Programmable The GSC300 can be programmed with our easy-to-use PC... more info
GSC300USBPGMR Software & USB Cable for Dynagen GSC300 Control

GSC300USBPGMR Software & USB Cable for Dynagen GSC300 Control

Part #: GSC300USBPGMR
$330.39
 This Dynagen GSC300-PGMR programmer kit allows you to customize your GSC300 to the exact settings you need. See manual:  GSC300 Configurator Software Manual v2.1  (Adobe Acrobat PDF,... more info
HAS0088, TG/TE Pro Basic J2 Harness with USB connector built in

HAS0088, TG/TE Pro Basic J2 Harness with USB connector built in

Part #: HAS0088
$141.43
HAS0088 has the USB built in without need for additional connectors, and also has the AC voltage and current sensing leads, the 5V transducer output, an extra transducer ground, and the MODBUS... more info
Model GSC400-PGMR Dynagen (Programmer Kit for GSC400)

Model GSC400-PGMR Dynagen (Programmer Kit for GSC400)

Part #: GSC400-PGMR
$206.70
This is the software & cable kit to program the GSC400 series with your laptop or any compatible PC. Please note:  As the GSC400 is being replaced by the TG410 due to advancements in... more info
RA400-LS, Rmt Annun RA-400 for GSC400 and TG410

RA400-LS, Rmt Annun RA-400 for GSC400 and TG410

Part #: RA400-LS
$549.99
  Suggested Accessories: The enclosure will not be included, order ACC0109 If using with the TG410, order DWG1522 If using with the GSC400, order DWG1454R1.4 If powering the controller and... more info
Snap-on RelayPak Option, Dynagen

Snap-on RelayPak Option, Dynagen

Part #: RP100-VM
$49.28
Snap-on RelayPak Option The RelayPak is socketed to accept four industry standard cube relays. When installed, the RelayPak (RP-100*) eliminates the need to mount and wire external slave relays for... more info
TE350 TOUGH Series Digital Genset Control, Dynagen

TE350 TOUGH Series Digital Genset Control, Dynagen

Part #: TE350-MP-CAN-G
$365.49
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our... more info
TE410 TOUGH Series Digital Control, DynaGen

TE410 TOUGH Series Digital Control, DynaGen

Part #: TE410-MP-CAN-MBI-G
$461.54
For variable-speed engines The TOUGH Series® TE controller is designed for variable-speed engines used in applications that require dependable operation over long periods such as pumping,... more info
TE600 / TE600A, Dynagen Tough Series, PRO

TE600 / TE600A, Dynagen Tough Series, PRO

Part #: TE600A
$669.85
The DynaGen™ TOUGH Series™ PRO TE600 and TG600 are autostart or manual digital controllers designed for complete control, protection, and engine instrumentation on mechanical or... more info
TG350 TOUGH Series Digital Genset Control, Dynagen

TG350 TOUGH Series Digital Genset Control, Dynagen

Part #: TG350-MP-CAN-G
$348.67
Tough Series - For engines or generators The TOUGH Series® controllers are designed to provide complete control, protection, and engine instrumentation for both standard and electronic CAN Bus... more info
TG350AMF TOUGH Series Control Auto Main Failure, DynaGen

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen

Part #: TG350AMF
$449.44
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our PC... more info
TG410 TOUGH Series Digital Genset Control, DynaGen

TG410 TOUGH Series Digital Genset Control, DynaGen

Part #: TG410-MP-CAN-MBI-G
$461.54
Tough Series - For engines or generators The TOUGH series controllers are designed to provide complete control, protection and engine instrumentation for both standard and electronic CAN Bus engines... more info