Advanced Service And Parts LLC [home link]
0
717.274.9396
English & Habla Español (Spanish)!

NOTICE: The shipping carriers UPS, FedEx, and USPS have suspended their service guarantees until further notice due to Covid-19. Please read more here.

TG350 TOUGH Series Digital Genset Control, Dynagen

$389.00  $319.00
Save: 18% off

1351
  • Part #: TG350-MP-CAN-G
  • 6 Units in Stock

    Tough Series - For engines or generators

    The TOUGH Series® controllers are designed to provide complete control, protection, and engine instrumentation for both standard and electronic CAN Bus engines as well as metering for generator applications.

    All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our PC configurator software.

    TOUGH series controllers are ideally suited for severe duty applications where reliability is critical such as mobile or stationary engine equipment and generators. 

    TG350

    The TG350 is the entry level option of the TOUGH Series and provides the following displays: Oil Pressure, Engine Temperature, Fuel Level, Oil Level, Engine Hours, RPM and Battery Volatage as well as J1939 Diagnostic Trouble Codes and a 150 Event Log. Two customer-defined sensor parameters for temperature, pressure, voltage or levels can also be configured.  For generator applications, the TG350 provides a display for 3-Phase  AC voltage and Frequency.  For applications requiring 3-Phase display of AC current, the TG410 model is recommended.

    Downloads

    For a complete list of available support documents please visit the DynaGen Support Section

    Dynagen SpecSheets TG350

    Download Software - RapidCore® Configuration Software 2.11.1.0

    Manual - TG350 User Manual

    Accessories for the TG350:

    Are you using the relay pack? If so, order DWG1475 and RP100-VM. If you have a 24V battery system, just add (3) RLY0054 relays

    If you do NOT need the relay pack, you'll need harness DWG1476 instead

    For displaying AC volts or using the generator output to sense speed, use harness DWG1479

    If the engine is electronic (CANBUS/J1939 capable), or you're using a magnetic pickup for speed sensing, use harness DWG1522

    If you need more than 3 switched inputs and 3 switched outputs or 3 senors, add harness DWG1477

    If wanting the enclosure order ENC0084 11.5x11.5x8.5" or ENC0080 8x8x4"

    1/8" Oil pressure sender, order any of these two options, Click here

    1/8" Temp Sender order 02022-00, 1/4" order 02023-00, 3/8" order 02024-00, 1/2" order 02025-00

    Optional Emergency Stop Button, order ACC87941

     

     

  • Part #: TG350-MP-CAN-G
  • 6 Units in Stock
  • Manufactured by: Dynagen
Manufactured by: Dynagen Product ID: 1351 $389.00  $319.00
Save: 18% off
New


Items you may also be interested in... (Notice: This is an auto-generated list and these items may or may not fit your application. Use discretion / contact us if unsure.)

AVR replaces Kohler C-255670 regulator

AVR replaces Kohler C-255670 regulator
Exact replacement for Kohler C-255670 AVR.  Comes with 1 year warranty!  Fits most Kohler Fast Response Generators. Genuine Kohler also available for higher cost: Kohler C-255670 Voltage...
$162.90

Snap-on RelayPak Option, Dynagen

Snap-on RelayPak Option, Dynagen
Snap-on RelayPak Option The RelayPak is socketed to accept four industry standard cube relays. When installed, the RelayPak (RP-100*) eliminates the need to mount and wire external slave relays for...
$42.96

DWG1479, 3-Phase AC Volts Harness (Gen or Mains)

DWG1479, 3-Phase AC Volts Harness (Gen or Mains)
4 foot May also be known as DWG1479R1.0
$14.99

Dynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus

Dynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus
Mag / CANbus / Modbus Harness for the Dynagen TG Series, 4 foot  Note:  This harness comes with quantity 2) 120 Ohm loose resistors. However, we have an option that is easier to install, in...
$25.97

DWG1475, Main I/O Starter Harness for Relay Pack (3 SW IN, 3 SW

DWG1475, Main I/O Starter Harness for Relay Pack (3 SW IN, 3 SW
For applications that utlize the RP100-VM RelayPak option.   - 3 SW In - 3 SW OUT - 3 Sensors - Power - 4'
$25.97


Dynagen ACC0099, Temp. Sender, Datcon 02025-00, 1/2"NPT

Dynagen ACC0099, Temp. Sender, Datcon 02025-00, 1/2"NPT
Dynagen ACC0099 / Datcon 02025-00, Temperature Sender Specs:  140-320 degrees F, 1/2 " National Pipe Threads 
$23.98

ACC0108-A, Oil Sender Replacement for Dynagen

ACC0108-A, Oil Sender Replacement for Dynagen
 Compatable with all Dynagen controllers that use an oil sender to display oil pressure on the digital panel ( GSC300, GSC400, TG350 & TG410).  Rated 0-100 psi. Suitable...
$39.98

Dynagen DWG1476, TG Main I/O Starter Harness

Dynagen DWG1476, TG Main I/O Starter Harness
To be used in applications  not  utlizing the RP100-VM RelayPak option. 3 SW IN, 3 SW OUT, 3 Sensors - 4'
$22.98

DWG1478, Magnetic Pickup/J1939 Interface Harness

DWG1478, Magnetic Pickup/J1939 Interface Harness
If you are using this harness with J1939 application (eg. Engine ECM or electronic governor) or CANBUS, you will need to use 2) 120 OHm resistors:  one at the dynagen control and one at the...
$15.98


Dynagen DWG1477, TG Advanced IO Harness

Dynagen DWG1477, TG Advanced IO Harness
 2 SW IN, 3 SW OUT, 1 Universal Sensor, 4'
$16.98

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers
You will need 3 of these to change your TG or GSC series controllers to 24 volt operation. 24V Cube Relay RLY0054 replaces:  Part # RLY0043 Part # AZ9731C24DC3E
$8.99

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410
We are now substituting this part to the ACC0108-A which has the same specs.  This may no longer be readily available on the shelf.  If you still require this part, there will be a lead...
$84.95


ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen
NPTF Temp Sender. 280F, 1/8" - 27 NPTF Fits all Dynagen controllers with digital display.  
$13.99

ENC0084, Enclosure, Dynagen TG Series 11.5x11.5x8.5"

ENC0084, Enclosure, Dynagen TG Series 11.5x11.5x8.5"
Enclosure does not include controller NEMA 1 Steel Encolsure with vibration mounts 11.5 x 11.5 x 8.5 inches
$123.88

ENC0080, Enclosure, Dynagen TG Series 8x8x4"

ENC0080, Enclosure, Dynagen TG Series 8x8x4"
NEMA 1 Steel Encolsure with vibration mounts
$98.90

Ronk PCBO2001S, was DynaGen VTSC100-240-12-X, Milbank Z1157780

Ronk PCBO2001S, was DynaGen VTSC100-240-12-X, Milbank Z1157780
New genuine control board for Dynagen, Milbank, and Ronk Vigilant Transfer Switch. Fits 220 - 240 Volt Single Phase or 120/208 volt 3 Phase Dynagen Vigilant VTS and Milbank Vigilant series auto...
$419.00

Hotstart TPS181GT10-000 Block Heater, 120V

Hotstart TPS181GT10-000 Block Heater, 120V
Compact 1800 watt, 120 volt Tank Heater with thermostat - High Impact Plastic. Ideal coolant heater for Generator sets. Standard heater for Onan, Kohler, Generac, Olympian, Cat, and many other...
$119.95


Hotstart TPS151GT10-000 Block Heater, Replaces Generac 84918G

Hotstart TPS151GT10-000 Block Heater, Replaces Generac 84918G
Compact 1500 watt, 120 volt Tank Heater with thermostat - High Impact Plastic. Ideal coolant heater for Generator sets. Standard heater for Onan, Kohler, Generac, Olympian, Cat, and many other...
$119.95

Leroy Somer R250 Replacement AVR Voltage Regulator

Leroy Somer R250 Replacement AVR Voltage Regulator
 This is an aftermarket replacement for leroy somer R250. Replaces the following parts: Cat / Olympian 10000-12943 Leroy Somer AEM110RE019 Leroy Somer R250
$229.00  $169.00
Save: 26% off

DWG1518, Harness, AC Current Sensing, TG Series

DWG1518, Harness, AC Current Sensing, TG Series
3 Phase AC Current Harness for the TG410 4'
$14.99

TG410 TOUGH Series Digital Genset Control, DynaGen

TG410 TOUGH Series Digital Genset Control, DynaGen
Tough Series - For engines or generators The TOUGH series controllers are designed to provide complete control, protection and engine instrumentation for both standard and electronic CAN Bus engines...
$499.00  $410.85
Save: 18% off

Dynagen ACC0046, Current Transformer 200:5 Amp

Dynagen ACC0046, Current Transformer 200:5 Amp
Dynagen 200A:5A Current Transformer Can replace # 2RL201 If out of stock see other options here
$29.97


6188000 Din Mount Kit for Time Switches

6188000 Din Mount Kit for Time Switches
6188000 Din Mount Kit for Time Switch.  Fits the following Clocks: TA0016 TA0019 TA0005 TA4353 The below image is what this part looks like when it is installed to a Exercise Clock:
$15.95

ACC0013 Time Switch, Exercise Clock, 12VDC SPST

ACC0013 Time Switch, Exercise Clock, 12VDC SPST
TA0005 Exercise Clock Time Switch, 12VDC SPST Recommended Din Mount Kit: 6188000 Din Mount Kit for Time Switches You can download the program instructions / manual here
$95.68

3034572-A 5/8" Mag Pickup, Cummins Type

3034572-A 5/8" Mag Pickup, Cummins Type
Replacement 5/8" Mag Pickup for Cummins 3034572
$44.95

MSP6724 Mag Pickup 3/4" X 16 UNF replacement

MSP6724 Mag Pickup 3/4" X 16 UNF replacement
This speed sensor fits many  applications for a 3/4" X 16 fine thread, 4 inches long speed sensor. Also fits most generator sets with Cummins B series engines like the following: 4B3.9...
$53.95

B-258545 Sink Assembly, Heat, for Kohler

B-258545 Sink Assembly, Heat, for Kohler
Dimensions of heatsink:  2 3/4"L   2 11/16"W   1 1/8"H 
$305.02


3/8" UNF Magnetic Pickup / Speed Sensor for Generator

3/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 3/8" fine threads, 2.5" long. Has 6 foot shielded cable attached. *Replaces the following: Barber Colman DYNT-17200 Generac 82130D  Generac 0 82130D ...
$68.95


Copyright © 2021 Advanced Service And Parts LLC (A.S.A.P). Powered by Zen Cart | Custom Zen Cart work by ZenExpert