Advanced Service And Parts LLC [home link]
0
1.800.630.1230
English & Espaol (Spanish)!

TG350 TOUGH Series Digital Genset Control, Dynagen

$389.00  $319.00
Save: 18% off

1351
  • Part #: TG350-MP-CAN-G
  • 10 Units in Stock

    Tough Series - For engines or generators

    All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our PC configurator software.

    TOUGH series controllers are ideally suited for severe duty applications where reliability is critical such as mobile or stationary engine equipment and generators. 

    TG350

    The TG350 is the entry level option of the TOUGH Series and provides the following displays: Oil Pressure, Engine Temperature, Fuel Level, Oil Level, Engine Hours, RPM and Battery Volatage as well as J1939 Diagnostic Trouble Codes and a 150 Event Log. Two customer-defined sensor parameters for temperature, pressure, voltage or levels can also be configured.  For generator applications, the TG350 provides a display for 3-Phase  AC voltage and Frequency.  For applications requiring 3-Phase display of AC current, the TG410 model is recommended.

    Downloads

    For a complete list of available support documents please visit the DynaGen Support Section

    Dynagen SpecSheets TG350

    Manual - TG350 User Manual

    Accessories for the TG350:

    Are you using the relay pack? If so, order DWG1475 and RP-100

    If you do NOT need the relay pack, you'll need harness DWG1476

    For displaying AC volts or using the generator output to sense speed, use harness DWG1479

    If the engine is electronic (CANBUS/J1939 capable), or you're using a magnetic pickup for speed sensing or you're needing Modbus capabilities (such as a RA400 or Netbiter), use harness DWG1522

    If you need more than 3 switched inputs and 3 switched outputs or 3 senors, use harness DWG1477

    If wanting the enclosure order ENC0084 11.5x11.5x8.5" or ENC0080 8x8x4"

     

  • Part #: TG350-MP-CAN-G
  • 10 Units in Stock
  • Manufactured by: Dynagen
RP-100

If you do NOT need the relay pack, you'll need harness DWG1476

For displaying AC volts or using the generator output to sense speed, use harness DWG1479

If the engine is electronic (CANBUS/J1939 capable), or you're using a magnetic pickup for speed sensing or you're needing Modbus capabilities (such as a RA400 or Netbiter), use harness DWG1522

If you need more than 3 switched inputs and 3 switched outputs or 3 senors, use harness DWG1477

If wanting the enclosure order ENC0084 11.5x11.5x8.5" or ENC0080 8x8x4"

 

'> Manufactured by: Dynagen Product ID: 1351 $389.00  $319.00
Save: 18% off
New



You might also like...

6188000 Din Mount Kit for Time Switches

6188000 Din Mount Kit for Time Switches
6188000 Din Mount Kit for Time Switch.  Fits the following Clocks: TA0016 TA0019 TA0005 TA4353 The below image is what this part looks like when it is installed to a Exercise Clock:
$14.95

ACC0013 Time Switch, Exercise Clock, 12VDC SPST

ACC0013 Time Switch, Exercise Clock, 12VDC SPST
TA0005 Exercise Clock Time Switch, 12VDC SPST Recommended Din Mount Kit: 6188000 Din Mount Kit for Time Switches   The below image is what this part looks like with that Din Mount Kit installed:
$89.95

3034572-A 5/8" Mag Pickup, Cummins Type

3034572-A 5/8" Mag Pickup, Cummins Type
Replacement 5/8" Mag Pickup for Cummins 3034572
$44.95

MSP6724 Mag Pickup 3/4" X 16 UNF replacement

MSP6724 Mag Pickup 3/4" X 16 UNF replacement
This speed sensor fits many  applications for a 3/4" X 16 fine thread speed sensor. Also fits most generator sets with Cummins B series engines like the following: 4B3.9 4BT3.9 ...
$53.95

Snap-on RelayPak Option, Dynagen

Snap-on RelayPak Option, Dynagen
Snap-on RelayPak Option The RelayPak is socketed to accept four industry standard cube relays. When installed, the RelayPak (RP-100*) eliminates the need to mount and wire external slave relays for...
$42.96


ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410
We are now substituting this part to the ACC0108-A which has the same specs.  This may no longer be readily available on the shelf.  If you still require this part, there will be a lead...
$77.92

AVR replaces Kohler C-255670 regulator

AVR replaces Kohler C-255670 regulator
Exact replacement for Kohler C-255670 AVR. Fits most Kohler Fast Response Generators. Genuine Kohler also available for higher cost: Kohler C-255670 Voltage Regulator, Genuine Also replaces these...
$146.00

B-258545 Sink Assembly, Heat, for Kohler

B-258545 Sink Assembly, Heat, for Kohler
Dimensions of heatsink:  2 3/4"L   2 11/16"W   1 1/8"H 
$283.79


ENC0080, Enclosure, Dynagen TG Series 8x8x4"

ENC0080, Enclosure, Dynagen TG Series 8x8x4"
NEMA 1 Steel Encolsure with vibration mounts
$98.90

3/8" UNF Magnetic Pickup / Speed Sensor for Generator

3/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 3/8" fine threads, 2.5" long. Has 6 foot shielded cable attached. *Replaces the following: Barber Colman DYNT-17200 Generac 82130D / 0 82130D Kohler...
$64.95

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers
You will need 3 of these to change your TG or GSC series controllers to 24 volt operation.       RLY0043
$8.99


Dynagen DWG1477, Advanced IO Harness

Dynagen DWG1477, Advanced IO Harness
 2 SW IN, 3 SW OUT, 1 Universal Sensor
$16.98

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen
NPTF Temp Sender. 280F, 1/8" - 27 NPTF Fits all Dynagen controllers with digital display.  
$16.49



Copyright © 2019 Advanced Service And Parts LLC (A.S.A.P). Powered by Zen Cart | Custom Zen Cart work by ZenExpert