Advanced Service And Parts LLC [home link]
0
1.800.630.1230
English & Espaсol (Spanish)!

Snap-on RelayPak Option, Dynagen

$42.96

1353
  • Part #: RP100-VM
  • 27 Units in Stock

    Snap-on RelayPak Option

    The RelayPak is socketed to accept four industry standard cube relays. When installed, the RelayPak (RP-100*) eliminates the need to mount and wire external slave relays for Fuel, Crank, and up to two other loads.

    * RP-100 includes mounting pack and 3 x 40 amp relays.

     

    Watch this video on how to install the RP100-VM. 

  • Part #: RP100-VM
  • 27 Units in Stock
  • Manufactured by: Dynagen
Manufactured by: Dynagen Product ID: 1353 $42.96New


You might also like...

Green LED Lamp replaces Onan 322-0170

Green LED Lamp replaces Onan 322-0170
LED Lamp, Green for Onan ATS Please note:  The lens on this lamp is not detachable like the original, so you need to make sure you order the right color. We can also get the...
$13.20

Dynagen DWG1477, Advanced IO Harness

Dynagen DWG1477, Advanced IO Harness
 2 SW IN, 3 SW OUT, 1 Universal Sensor
$16.98


TG410 TOUGH Series Digital Genset Control, DynaGen

TG410 TOUGH Series Digital Genset Control, DynaGen
Please Note!  The TG410 is currently UNAVAILABLE from the factory.  This part will be on back-order until approximately the first week in October.  If you are ok with waiting, feel...
$499.00  $412.59
Save: 17% off

Red LED Lamp replaces Onan 322-0137

Red LED Lamp replaces Onan 322-0137
LED Lamp, Red for Onan ATS Please note:  The lens on this lamp is not detachable like the original, so you need to make sure you order the right color. We can also get the...
$13.20

TE350 TOUGH Series Digital Genset Control, Dynagen

TE350 TOUGH Series Digital Genset Control, Dynagen
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our...
$326.67

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers
You will need 3 of these to change your TG or GSC series controllers to 24 volt operation. Replaces part # RLY0043
$8.99


ENC0080, Enclosure, Dynagen TG Series 8x8x4"

ENC0080, Enclosure, Dynagen TG Series 8x8x4"
NEMA 1 Steel Encolsure with vibration mounts
$98.90

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen
NPTF Temp Sender. 280F, 1/8" - 27 NPTF Fits all Dynagen controllers with digital display.  
$16.49

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410
We are now substituting this part to the ACC0108-A which has the same specs.  This may no longer be readily available on the shelf.  If you still require this part, there will be a lead...
$77.92


TG350 TOUGH Series Digital Genset Control, Dynagen

TG350 TOUGH Series Digital Genset Control, Dynagen
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our...
$389.00  $319.00
Save: 18% off

PCBO2001S Ronk Control, PCB was VTSC100-240-12-X

PCBO2001S Ronk Control, PCB was VTSC100-240-12-X
New genuine control board for Dynagen, Milbank, and Ronk Vigilant Transfer Switch. Fits 220 - 240 Volt Single Phase or 120/208 volt 3 Phase Dynagen Vigilant VTS and Milbank Vigilant series auto...
$419.00

ACC0108-A, Oil Sender Replacement for Dynagen

ACC0108-A, Oil Sender Replacement for Dynagen
 Compatable with all Dynagen controllers that use an oil sender to display oil pressure on the digital panel ( GSC300, GSC400, TG350 & TG410).  Rated 0-100 psi. Suitable...
$39.98


24 Volt Relay # RLY0017 for ES52 and ES51 Dynagen Control

24 Volt Relay # RLY0017 for ES52 and ES51 Dynagen Control
These heavy-duty 24VDC relays must be installed in the Dynagen ES51 or ES52 series engine controller for 24V DC engines or generators.  This is Dynagen Accessory # RLY0017. YOU MUST BUY TWO to...
$8.99

Basic Harness for GSC400

Basic Harness for GSC400
5ft Harness Starter Kit (AC Current Sensing, Digital Input, and Analog Input Cables)
$55.94

12 Volt Relay # RLY0013 for ES52 and ES51 Dynagen Control

12 Volt Relay # RLY0013 for ES52 and ES51 Dynagen Control
These heavy-duty 12VDC relays must be installed in the Dynagen ES51 or ES52 series engine controller for 12V DC engines or generators.  This is Dynagen Accessory # RLY0013.
$4.99

Dynagen ACC0046, Current Transformer 200:5 Amp

Dynagen ACC0046, Current Transformer 200:5 Amp
Dynagen 200A:5A Current Transformer If out of stock see other options here
$29.97


Dynagen ACC0047, Current Transformer 300:5 Amp

Dynagen ACC0047, Current Transformer 300:5 Amp
Dynagen 300A:5A Current Transformer If out of stock, see other options here
$30.97

RA400-LS, Rmt Annun RA-400 for GSC400 and TG410

RA400-LS, Rmt Annun RA-400 for GSC400 and TG410
RA400 User Manual Data Sheet Suggested Accessories: The enclosure will not be included, order ACC0109 If using with the TG410, order DWG1522 If using with the GSC400, order DWG1454R1.4 If...
$541.46

ACC0109, Enclosure for RA-400

ACC0109, Enclosure for RA-400
8x8x4 Metal Enclosure for RA400
$56.94

Dynagen ACC0045, Current Transformer 100:5 Amp

Dynagen ACC0045, Current Transformer 100:5 Amp
Current Transformer, 10KV, 100A:5A If out of stock see other options here
$29.97


Dynagen DWG1410, Pre-Crimped Wires, 5"

Dynagen DWG1410, Pre-Crimped Wires, 5"
Extra Pre-Crimped Wires Package of 5 5 foot length
$30.97

6188000 Din Mount Kit for Time Switches

6188000 Din Mount Kit for Time Switches
6188000 Din Mount Kit for Time Switch.  Fits the following Clocks: TA0016 TA0019 TA0005 TA4353 The below image is what this part looks like when it is installed to a Exercise Clock:
$14.95

ACC0013 Time Switch, Exercise Clock, 12VDC SPST

ACC0013 Time Switch, Exercise Clock, 12VDC SPST
TA0005 Exercise Clock Time Switch, 12VDC SPST Recommended Din Mount Kit: 6188000 Din Mount Kit for Time Switches   The below image is what this part looks like with that Din Mount Kit installed:
$89.95

3034572-A 5/8" Mag Pickup, Cummins Type

3034572-A 5/8" Mag Pickup, Cummins Type
Replacement 5/8" Mag Pickup for Cummins 3034572
$44.95


MSP6724 Mag Pickup 3/4" X 16 UNF replacement

MSP6724 Mag Pickup 3/4" X 16 UNF replacement
This speed sensor fits many  applications for a 3/4" X 16 fine thread speed sensor. Also fits most generator sets with Cummins B series engines like the following: 4B3.9 4BT3.9 ...
$53.95

AVR replaces Kohler C-255670 regulator

AVR replaces Kohler C-255670 regulator
Exact replacement for Kohler C-255670 AVR. Fits most Kohler Fast Response Generators. Genuine Kohler also available for higher cost: Kohler C-255670 Voltage Regulator, Genuine Also replaces these...
$162.90

B-258545 Sink Assembly, Heat, for Kohler

B-258545 Sink Assembly, Heat, for Kohler
Dimensions of heatsink:  2 3/4"L   2 11/16"W   1 1/8"H 
$283.79

3/8" UNF Magnetic Pickup / Speed Sensor for Generator

3/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 3/8" fine threads, 2.5" long. Has 6 foot shielded cable attached. *Replaces the following: Barber Colman DYNT-17200 Generac 82130D / 0 82130D Kohler...
$64.95


Sender, 280F, M14x1.5 threads, for Dynagen etc.

Sender, 280F, M14x1.5 threads, for Dynagen etc.
This temperature sender is compatible with Dynagen TG410, TG350, GSC300, and GSC400. High Range Temperature Sender 100-280F and 140-320F   M14x1.5 Metric threads
$20.60

239282 Brush, Kohler

239282 Brush, Kohler
 Kohler 239282 Brush - sold as (1) each.  You will need at least two in most machines.
$9.21

5/8" UNF Magnetic Pickup / Speed Sensor for Generator

5/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 5/8" fine threads and nearly 4" long. Has 12" leads attached. Wires can be extended as needed by crimping or soldering to existing wiring. Replaces some...
$62.95


Governors America"GAC" ESD2244-24 Control, 24V

Governors America"GAC" ESD2244-24 Control, 24V
This is a new 24VDC governor control capable of running actuators on a constant speed engine or generator set. Compatible with Woodward and Barber Colman actuators mpounted on top of Stanadyne...
$310.00  $279.95
Save: 10% off

Charger, Microgenius2 12/24V, 12/10A

Charger, Microgenius2 12/24V, 12/10A
Click for Sens products information and applications Easy Everything Easy Field Selectability SENS’ advanced production system configures each charger model to the exact charging...
$598.00

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our PC...
$424.00

Basler AVC63-4 Voltage Regulator, Genuine AVR

Basler AVC63-4 Voltage Regulator, Genuine AVR
New Genuine Basler AVC63-4 Voltage Regulator input power & sensing 190-240 Vac Output 63 Vdc, 4 Amps Exact equal for PowerTech PT# 06REG634AVC  Basler Voltage Regulator 63-4 AVC NOTE:...
$267.00  $214.95
Save: 19% off


Copyright © 2019 Advanced Service And Parts LLC (A.S.A.P). Powered by Zen Cart | Custom Zen Cart work by ZenExpert