Advanced Service And Parts LLC [home link]
0
717.274.9396
English & Habla Español (Spanish)!


NOTICE: The shipping carriers UPS, FedEx, and USPS have suspended their service guarantees until further notice due to Covid-19, the hurricanes, and the wildfires.
We will do our part in getting in stock items shipped out right away; however, if a shipment is delayed, there are no refunds available.

We are open! There may be some delays, please click here for more updates on our operations during the Covid-19 pandemic.
To our local customers, please click here for additional information.


ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410

$84.95

1947
  • Part #: ACC0108
  • 18 Units in Stock

    We are now substituting this part to the ACC0108-A which has the same specs.  This may no longer be readily available on the shelf.  If you still require this part, there will be a lead time to order it in.  Feel free to contact us with questions.  

    This hi quality Stewart Warner sender is rated 0-100 psi.  Compatable with all Dynagen controllers that use an oil sender to display oil pressure on the digital panel.  Has 1/8" NPT threads with an adapter bushing for 1/4" NPT.

     

  • Part #: ACC0108
  • 18 Units in Stock
Manufactured by: Product ID: 1947 $84.95New


Items you may also be interested in... (Notice: This is an auto-generated list and these items may or may not fit your application. Use discretion / contact us if unsure.)

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers
You will need 3 of these to change your TG or GSC series controllers to 24 volt operation. 24V Cube Relay RLY0054 replaces:  Part # RLY0043 Part # AZ9731C24DC3E
$8.99

Snap-on RelayPak Option, Dynagen

Snap-on RelayPak Option, Dynagen
Snap-on RelayPak Option The RelayPak is socketed to accept four industry standard cube relays. When installed, the RelayPak (RP-100*) eliminates the need to mount and wire external slave relays for...
$42.96

DWG1479, 3-Phase AC Volts Harness (Gen or Mains)

DWG1479, 3-Phase AC Volts Harness (Gen or Mains)
4 foot May also be known as DWG1479R1.0
$14.99

DWG1518, Harness, AC Current Sensing, TG Series

DWG1518, Harness, AC Current Sensing, TG Series
3 Phase AC Current Harness for the TG410 4'
$14.99

DWG1475, Main I/O Starter Harness for Relay Pack (3 SW IN, 3 SW

DWG1475, Main I/O Starter Harness for Relay Pack (3 SW IN, 3 SW
For applications that utlize the RP100-VM RelayPak option.   - 3 SW In - 3 SW OUT - 3 Sensors - Power - 4'
$25.97


RA400-LS, Rmt Annun RA-400 for GSC400 and TG410

RA400-LS, Rmt Annun RA-400 for GSC400 and TG410
RA400 User Manual Data Sheet Suggested Accessories: The enclosure will not be included, order ACC0109 If using with the TG410, order DWG1522 If using with the GSC400, order DWG1454R1.4 If...
$541.46

TG410 TOUGH Series Digital Genset Control, DynaGen

TG410 TOUGH Series Digital Genset Control, DynaGen
Tough Series - For engines or generators The TOUGH series controllers are designed to provide complete control, protection and engine instrumentation for both standard and electronic CAN Bus engines...
$499.00  $412.59
Save: 17% off

Dynagen ACC0099, Temp. Sender, Datcon 02025-00, 1/2"NPT

Dynagen ACC0099, Temp. Sender, Datcon 02025-00, 1/2"NPT
Dynagen ACC0099 / Datcon 02025-00, Temperature Sender Specs:  140-320 degrees F, 1/2 " National Pipe Threads 
$23.98

ENC0084, Enclosure, Dynagen TG Series 11.5x11.5x8.5"

ENC0084, Enclosure, Dynagen TG Series 11.5x11.5x8.5"
Enclosure does not include controller NEMA 1 Steel Encolsure with vibration mounts 11.5 x 11.5 x 8.5 inches
$123.88

ENC0080, Enclosure, Dynagen TG Series 8x8x4"

ENC0080, Enclosure, Dynagen TG Series 8x8x4"
NEMA 1 Steel Encolsure with vibration mounts
$98.90


Dynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus

Dynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus
Mag / CANbus / Modbus Harness for the Dynagen TG Series 4'
$25.97

ACC0109, Enclosure for RA-400

ACC0109, Enclosure for RA-400
8x8x4 Metal Enclosure for RA400
$56.94

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen
NPTF Temp Sender. 280F, 1/8" - 27 NPTF Fits all Dynagen controllers with digital display.  
$13.99

CT Donut 2.5" 500:5

CT Donut 2.5" 500:5
500A:5A Current Transformer 2.5" Opening in the center   If out of stock, see other options here
$39.95


TG350AMF TOUGH Series Control Auto Main Failure, DynaGen

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our PC...
$424.00

Dynagen DWG1477, TG Advanced IO Harness

Dynagen DWG1477, TG Advanced IO Harness
 2 SW IN, 3 SW OUT, 1 Universal Sensor, 4'
$16.98

Dynagen ACC0046, Current Transformer 200:5 Amp

Dynagen ACC0046, Current Transformer 200:5 Amp
Dynagen 200A:5A Current Transformer If out of stock see other options here
$29.97


02067-00, Sender for Dynagen

02067-00, Sender for Dynagen
M16x1.5 100-280,140-320
$17.18

TG350 TOUGH Series Digital Genset Control, Dynagen

TG350 TOUGH Series Digital Genset Control, Dynagen
Tough Series - For engines or generators The TOUGH Series® controllers are designed to provide complete control, protection, and engine instrumentation for both standard and electronic CAN Bus...
$389.00  $319.00
Save: 18% off

Hotstart TPS151GT10-000 Block Heater, Replaces Generac 84918G

Hotstart TPS151GT10-000 Block Heater, Replaces Generac 84918G
Compact 1500 watt, 120 volt Tank Heater with thermostat - High Impact Plastic. Ideal coolant heater for Generator sets. Standard heater for Onan, Kohler, Generac, Olympian, Cat, and many other...
$119.95

Newage AS440, Cummins Onan A029J089 replacement regulator AVR

Newage AS440, Cummins Onan A029J089 replacement regulator AVR
This is an "exact replacement" for the following voltage regulators: Stamford Newage AS440 Stamford Newage E000-24403 or E000-24403/1P Cummins Onan A029J089 Also replaces the following...
$249.00  $199.95
Save: 20% off

MSP6729-A Mag Pick-up, 3/8" UNF w/ cable

MSP6729-A Mag Pick-up, 3/8" UNF w/ cable
This quality mag pick-up has 3/8" fine threads, 2.5" long. Has 6 foot shielded cable attached.
$39.95


Ronk PCBO2001S, was DynaGen VTSC100-240-12-X, Milbank Z1157780

Ronk PCBO2001S, was DynaGen VTSC100-240-12-X, Milbank Z1157780
New genuine control board for Dynagen, Milbank, and Ronk Vigilant Transfer Switch. Fits 220 - 240 Volt Single Phase or 120/208 volt 3 Phase Dynagen Vigilant VTS and Milbank Vigilant series auto...
$419.00

Dynagen ACC0047, Current Transformer 300:5 Amp

Dynagen ACC0047, Current Transformer 300:5 Amp
Dynagen 300A:5A Current Transformer If out of stock, see other options here
$30.97

Dynagen DWG1476, TG Main I/O Starter Harness

Dynagen DWG1476, TG Main I/O Starter Harness
To be used in applications  not  utlizing the RP100-VM RelayPak option. 3 SW IN, 3 SW OUT, 3 Sensors - 4'
$22.98

Dynagen ACC0045, Current Transformer 100:5 Amp

Dynagen ACC0045, Current Transformer 100:5 Amp
Current Transformer, 10KV, 100A:5A If out of stock see other options here
$29.97

6188000 Din Mount Kit for Time Switches

6188000 Din Mount Kit for Time Switches
6188000 Din Mount Kit for Time Switch.  Fits the following Clocks: TA0016 TA0019 TA0005 TA4353 The below image is what this part looks like when it is installed to a Exercise Clock:
$14.95


ACC0013 Time Switch, Exercise Clock, 12VDC SPST

ACC0013 Time Switch, Exercise Clock, 12VDC SPST
TA0005 Exercise Clock Time Switch, 12VDC SPST Recommended Din Mount Kit: 6188000 Din Mount Kit for Time Switches You can download the program instructions / manual here
$89.95

3034572-A 5/8" Mag Pickup, Cummins Type

3034572-A 5/8" Mag Pickup, Cummins Type
Replacement 5/8" Mag Pickup for Cummins 3034572
$44.95

MSP6724 Mag Pickup 3/4" X 16 UNF replacement

MSP6724 Mag Pickup 3/4" X 16 UNF replacement
This speed sensor fits many  applications for a 3/4" X 16 fine thread, 4 inches long speed sensor. Also fits most generator sets with Cummins B series engines like the following: 4B3.9...
$53.95

Dynagen GSC400 Plus Controller for Generator & KPC-1000

Dynagen GSC400 Plus Controller for Generator & KPC-1000
Please note before ordering this part:  The GSC400 has been in production for approximately 13 years, and is a great product to this day. However, because of advances in technology and newer...
$556.44  $498.00
Save: 11% off


GSC300 Auto Start Engine Control Module for Generators, Engines

GSC300 Auto Start Engine Control Module for Generators, Engines
Usually in stock  to ship right away! Computer Programmable The GSC300 can be programmed with our easy-to-use PC software interface (extra cost option) that allows customization of messaging;...
$349.00  $261.74
Save: 25% off

GSC300USBPGMR Software & USB Cable for Dynagen GSC300 Control

GSC300USBPGMR Software & USB Cable for Dynagen GSC300 Control
 This Dynagen GSC300-PGMR programmer kit allows you to customize your GSC300 to the exact settings you need. See manual:  GSC300 Configurator Software Manual v2.1  (Adobe Acrobat PDF,...
$311.69

Sender, 280F, M14x1.5 threads, for Dynagen etc.

Sender, 280F, M14x1.5 threads, for Dynagen etc.
This temperature sender is compatible with Dynagen TG410, TG350, GSC300, and GSC400. High Range Temperature Sender 100-280F and 140-320F   M14x1.5 Metric threads
$20.60

3/8" UNF Magnetic Pickup / Speed Sensor for Generator

3/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 3/8" fine threads, 2.5" long. Has 6 foot shielded cable attached. *Replaces the following: Barber Colman DYNT-17200 Generac 82130D  Generac 0 82130D ...
$68.95

5/8" UNF Magnetic Pickup / Speed Sensor for Generator

5/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 5/8" fine threads and nearly 4" long. Has 12" leads attached. Wires can be extended as needed by crimping or soldering to existing wiring. Replaces some...
$69.52


Universal AVR replaces ADVR648

Universal AVR replaces ADVR648
LOW PRICE / High Quality!  Our ADVR635 universal automatic generator voltage regulator works on exciter fields as low as 9 ohms with or without brushes. Note: Brush type machines may require...
$169.00  $149.00
Save: 12% off

02201581, Battery Charger, 24V 2.5A

02201581, Battery Charger, 24V 2.5A
24v Battery Tender Even though we stock and sell this battery charger, we do recommend our new SENS charger as a superior replacement for this part.  For a few dollars more, you can upgrade...
$137.80

ESD2244-24 Governor Control for 24V Stanadyne & linear actuator

ESD2244-24 Governor Control for 24V Stanadyne & linear actuator
This is a new 24VDC governor control capable of running actuators on a constant speed engine or generator set. Compatible with GAC, Woodward and Barber Colman actuators mounted on top of...
$322.00  $283.36
Save: 12% off


Hotstart TPS151GT8-000 Heater for Onan 333-0588-03, 084918L

Hotstart TPS151GT8-000 Heater for Onan 333-0588-03, 084918L
We have a low price policy! Dealer prices and quantity discounts also available. This is primarily used on gas engines.  We recommend the TPS151GT10-000 Block Heater for diesel engines....
$178.81  $119.95
Save: 33% off

Basic Harness for GSC400

Basic Harness for GSC400
8ft Harness Starter Kit (AC Current Sensing, Digital Input, and Analog Input Cables) for the GSC400
$59.95

Model GSC400-PGMR Dynagen (Programmer Kit for GSC400)

Model GSC400-PGMR Dynagen (Programmer Kit for GSC400)
This is the software & cable kit to program the GSC400 series with your laptop or any compatible PC. Please note:  As the GSC400 is being replaced by the TG410 due to advancements in...
$195.00


Copyright © 2020 Advanced Service And Parts LLC (A.S.A.P). Powered by Zen Cart | Custom Zen Cart work by ZenExpert