Advanced Service And Parts LLC [home link]
0
1.800.630.1230
English & Espaсol (Spanish)!

Dynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus

$25.97

1501
  • Part #: DWG1522
  • 16 Units in Stock

  • Part #: DWG1522
  • 16 Units in Stock
  • Manufactured by: Dynagen
Manufactured by: Dynagen Product ID: 1501 $25.97New


Items you may also be interested in... (Notice: This is an auto-generated list and these items may or may not fit your application. Use discretion / contact us if unsure.)

Snap-on RelayPak Option, Dynagen

Snap-on RelayPak Option, Dynagen
Snap-on RelayPak Option The RelayPak is socketed to accept four industry standard cube relays. When installed, the RelayPak (RP-100*) eliminates the need to mount and wire external slave relays for...
$42.96

DWG1479, 3-Phase AC Volts Harness (Gen or Mains)

DWG1479, 3-Phase AC Volts Harness (Gen or Mains)
  May also be known as DWG1479R1.0
$14.99

TG410 TOUGH Series Digital Genset Control, DynaGen

TG410 TOUGH Series Digital Genset Control, DynaGen
Tough Series - For engines or generators The TOUGH series controllers are designed to provide complete control, protection and engine instrumentation for both standard and electronic CAN Bus engines...
$499.00  $412.59
Save: 17% off

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers
You will need 3 of these to change your TG or GSC series controllers to 24 volt operation. RLY0054 replaces:  Part # RLY0043 Part # AZ9731C24DC3E
$8.99


Dynagen DWG1477, Advanced IO Harness

Dynagen DWG1477, Advanced IO Harness
 2 SW IN, 3 SW OUT, 1 Universal Sensor
$16.98

ENC0080, Enclosure, Dynagen TG Series 8x8x4"

ENC0080, Enclosure, Dynagen TG Series 8x8x4"
NEMA 1 Steel Encolsure with vibration mounts
$98.90

Sender, 280F, M14x1.5 threads, for Dynagen etc.

Sender, 280F, M14x1.5 threads, for Dynagen etc.
This temperature sender is compatible with Dynagen TG410, TG350, GSC300, and GSC400. High Range Temperature Sender 100-280F and 140-320F   M14x1.5 Metric threads
$20.60

RA400-LS, Rmt Annun RA-400 for GSC400 and TG410

RA400-LS, Rmt Annun RA-400 for GSC400 and TG410
RA400 User Manual Data Sheet Suggested Accessories: The enclosure will not be included, order ACC0109 If using with the TG410, order DWG1522 If using with the GSC400, order DWG1454R1.4 If...
$541.46


Dynagen ACC0045, Current Transformer 100:5 Amp

Dynagen ACC0045, Current Transformer 100:5 Amp
Current Transformer, 10KV, 100A:5A If out of stock see other options here
$29.97

ACC0108-A, Oil Sender Replacement for Dynagen

ACC0108-A, Oil Sender Replacement for Dynagen
 Compatable with all Dynagen controllers that use an oil sender to display oil pressure on the digital panel ( GSC300, GSC400, TG350 & TG410).  Rated 0-100 psi. Suitable...
$39.98

Generac 098647ASRV (98647) Governor Control Kit, Stepper

Generac 098647ASRV (98647) Governor Control Kit, Stepper
Generac 098647ASRV Electronic Governor "Speed Control Kit" is the latest revision control for the Governor Stepper Motor. Includes Controller, Wiring Harness, and Instructions.  May...
$192.91


Green LED Lamp replaces Onan 322-0170

Green LED Lamp replaces Onan 322-0170
LED Lamp, Green for Onan ATS Please note:  The lens on this lamp is not detachable like the original, so you need to make sure you order the right color. We can also get the...
$13.20

Red LED Lamp replaces Onan 322-0137

Red LED Lamp replaces Onan 322-0137
LED Lamp, Red for Onan ATS Please note:  The lens on this lamp is not detachable like the original, so you need to make sure you order the right color. We can also get the...
$13.20

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen
NPTF Temp Sender. 280F, 1/8" - 27 NPTF Fits all Dynagen controllers with digital display.  
$13.99


ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410
We are now substituting this part to the ACC0108-A which has the same specs.  This may no longer be readily available on the shelf.  If you still require this part, there will be a lead...
$84.95

02067-00, Sender for Dynagen

02067-00, Sender for Dynagen
M16x1.5 100-280,140-320
$17.18

Dynagen ACC0047, Current Transformer 300:5 Amp

Dynagen ACC0047, Current Transformer 300:5 Amp
Dynagen 300A:5A Current Transformer If out of stock, see other options here
$30.97


24 Volt Relay # RLY0017 for ES52 and ES51 Dynagen Control

24 Volt Relay # RLY0017 for ES52 and ES51 Dynagen Control
These heavy-duty 24VDC relays must be installed in the Dynagen ES51 or ES52 series engine controller for 24V DC engines or generators.  This is Dynagen Accessory # RLY0017. YOU MUST BUY TWO to...
$8.99

Basic Harness for GSC400

Basic Harness for GSC400
5ft Harness Starter Kit (AC Current Sensing, Digital Input, and Analog Input Cables)
$55.94

12 Volt Relay # RLY0013 for ES52 and ES51 Dynagen Control

12 Volt Relay # RLY0013 for ES52 and ES51 Dynagen Control
These heavy-duty 12VDC relays must be installed in the Dynagen ES51 or ES52 series engine controller for 12V DC engines or generators.  This is Dynagen Accessory # RLY0013.
$7.99

Dynagen ACC0046, Current Transformer 200:5 Amp

Dynagen ACC0046, Current Transformer 200:5 Amp
Dynagen 200A:5A Current Transformer If out of stock see other options here
$29.97


TG350 TOUGH Series Digital Genset Control, Dynagen

TG350 TOUGH Series Digital Genset Control, Dynagen
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our...
$389.00  $319.00
Save: 18% off

ACC0109, Enclosure for RA-400

ACC0109, Enclosure for RA-400
8x8x4 Metal Enclosure for RA400
$56.94

3/8" UNF Magnetic Pickup / Speed Sensor for Generator

3/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 3/8" fine threads, 2.5" long. Has 6 foot shielded cable attached. *Replaces the following: Barber Colman DYNT-17200 Generac 82130D  Generac 0 82130D ...
$68.95

6188000 Din Mount Kit for Time Switches

6188000 Din Mount Kit for Time Switches
6188000 Din Mount Kit for Time Switch.  Fits the following Clocks: TA0016 TA0019 TA0005 TA4353 The below image is what this part looks like when it is installed to a Exercise Clock:
$14.95


ACC0013 Time Switch, Exercise Clock, 12VDC SPST

ACC0013 Time Switch, Exercise Clock, 12VDC SPST
TA0005 Exercise Clock Time Switch, 12VDC SPST Recommended Din Mount Kit: 6188000 Din Mount Kit for Time Switches   The below image is what this part looks like with that Din Mount Kit installed:
$89.95

02201581, Battery Charger, 24V 2.5A

02201581, Battery Charger, 24V 2.5A
24v Battery Tender Even though we stock and sell this battery charger, we do recommend our new SENS charger as a superior replacement for this part.  For a few dollars more, you can upgrade...
$137.80

Governors America"GAC" ESD2244-24 Control, 24V

Governors America"GAC" ESD2244-24 Control, 24V
This is a new 24VDC governor control capable of running actuators on a constant speed engine or generator set. Compatible with Woodward and Barber Colman actuators mpounted on top of Stanadyne...
$310.00  $283.36
Save: 9% off


Netbiter EC150 Remote Monitor for Generators & Equipment

Netbiter EC150 Remote Monitor for Generators & Equipment
Excellent to monitor your Generator when used with Dynagen TG350, TG410, and GSC400! The Netbiter EC150 communication gateway connects to field equipment via several connection methods: Serial...
$629.00

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our PC...
$424.00

DWG1454, Cable for RA400 & WS100, (RS485) Dynagen

DWG1454, Cable for RA400 & WS100, (RS485) Dynagen
5' pigtail harness for Modbus connection for the GSC400 Click here for wiring diagram. Please note before ordering this part:  The GSC400 has been in production for approximately 13...
$46.95

3034572-A 5/8" Mag Pickup, Cummins Type

3034572-A 5/8" Mag Pickup, Cummins Type
Replacement 5/8" Mag Pickup for Cummins 3034572
$44.95

Model GSC400-PGMR Dynagen (Programmer Kit for GSC400)

Model GSC400-PGMR Dynagen (Programmer Kit for GSC400)
This is the software & cable kit to program the GSC400 series with your laptop or any compatible PC. Please note:  As the GSC400 is being replaced by the TG410 due to advancements in...
$195.00


Dynagen DWG1410, Pre-Crimped Wires, 5"

Dynagen DWG1410, Pre-Crimped Wires, 5"
Extra Pre-Crimped Wires Package of 5 5 foot length
$30.97

Dynagen GSC400 Plus Controller for Generator & KPC-1000

Dynagen GSC400 Plus Controller for Generator & KPC-1000
~ Special sale while supplies last! ~   Please note before ordering this part:  The GSC400 has been in production for approximately 13 years, and is a great product to this day. However,...
$556.44  $498.00
Save: 11% off

Dynagen DWG1373, J1939 Cable for GSC400, 5 ft.

Dynagen DWG1373, J1939 Cable for GSC400, 5 ft.
5' CANbus harness for the GSC400 Click here for wiring diagram.
$30.97


Copyright © 2020 Advanced Service And Parts LLC (A.S.A.P). Powered by Zen Cart | Custom Zen Cart work by ZenExpert