Advanced Service And Parts LLC [home link]
0
717.274.9396
English & Habla Español (Spanish)!


NOTICE: The shipping carriers UPS, FedEx, and USPS have suspended their service guarantees until further notice due to Covid-19, the hurricanes, and the wildfires.
We will do our part in getting in stock items shipped out right away; however, if a shipment is delayed, there are no refunds available.

We are open! There may be some delays, please click here for more updates on our operations during the Covid-19 pandemic.
To our local customers, please click here for additional information.


24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

$8.99

877
  • Part #: RLY0054
  • 19 Units in Stock

    You will need 3 of these to change your TG or GSC series controllers to 24 volt operation.

    24V Cube Relay

    RLY0054 replaces: 

    • Part # RLY0043
    • Part # AZ9731C24DC3E
  • Part #: RLY0054
  • 19 Units in Stock
  • Manufactured by: Dynagen
Manufactured by: Dynagen Product ID: 877 $8.99New


Items you may also be interested in... (Notice: This is an auto-generated list and these items may or may not fit your application. Use discretion / contact us if unsure.)

Snap-on RelayPak Option, Dynagen

Snap-on RelayPak Option, Dynagen
Snap-on RelayPak Option The RelayPak is socketed to accept four industry standard cube relays. When installed, the RelayPak (RP-100*) eliminates the need to mount and wire external slave relays for...
$42.96

DWG1479, 3-Phase AC Volts Harness (Gen or Mains)

DWG1479, 3-Phase AC Volts Harness (Gen or Mains)
4 foot May also be known as DWG1479R1.0
$14.99

Dynagen DWG1477, TG Advanced IO Harness

Dynagen DWG1477, TG Advanced IO Harness
 2 SW IN, 3 SW OUT, 1 Universal Sensor, 4'
$16.98

ENC0080, Enclosure, Dynagen TG Series 8x8x4"

ENC0080, Enclosure, Dynagen TG Series 8x8x4"
NEMA 1 Steel Encolsure with vibration mounts
$98.90

DWG1518, Harness, AC Current Sensing, TG Series

DWG1518, Harness, AC Current Sensing, TG Series
3 Phase AC Current Harness for the TG410 4'
$14.99


Dynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus

Dynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus
Mag / CANbus / Modbus Harness for the Dynagen TG Series 4'
$25.97

DWG1475, Main I/O Starter Harness for Relay Pack (3 SW IN, 3 SW

DWG1475, Main I/O Starter Harness for Relay Pack (3 SW IN, 3 SW
For applications that utlize the RP100-VM RelayPak option.   - 3 SW In - 3 SW OUT - 3 Sensors - Power - 4'
$25.97

TG410 TOUGH Series Digital Genset Control, DynaGen

TG410 TOUGH Series Digital Genset Control, DynaGen
Tough Series - For engines or generators The TOUGH series controllers are designed to provide complete control, protection and engine instrumentation for both standard and electronic CAN Bus engines...
$499.00  $412.59
Save: 17% off

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen
NPTF Temp Sender. 280F, 1/8" - 27 NPTF Fits all Dynagen controllers with digital display.  
$13.99


02067-00, Sender for Dynagen

02067-00, Sender for Dynagen
M16x1.5 100-280,140-320
$17.18

ACC0108-A, Oil Sender Replacement for Dynagen

ACC0108-A, Oil Sender Replacement for Dynagen
 Compatable with all Dynagen controllers that use an oil sender to display oil pressure on the digital panel ( GSC300, GSC400, TG350 & TG410).  Rated 0-100 psi. Suitable...
$39.98


Dynagen ACC0099, Temp. Sender, Datcon 02025-00, 1/2"NPT

Dynagen ACC0099, Temp. Sender, Datcon 02025-00, 1/2"NPT
Dynagen ACC0099 / Datcon 02025-00, Temperature Sender Specs:  140-320 degrees F, 1/2 " National Pipe Threads 
$23.98

RA400-LS, Rmt Annun RA-400 for GSC400 and TG410

RA400-LS, Rmt Annun RA-400 for GSC400 and TG410
RA400 User Manual Data Sheet Suggested Accessories: The enclosure will not be included, order ACC0109 If using with the TG410, order DWG1522 If using with the GSC400, order DWG1454R1.4 If...
$541.46

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410
We are now substituting this part to the ACC0108-A which has the same specs.  This may no longer be readily available on the shelf.  If you still require this part, there will be a lead...
$84.95

ENC0084, Enclosure, Dynagen TG Series 11.5x11.5x8.5"

ENC0084, Enclosure, Dynagen TG Series 11.5x11.5x8.5"
Enclosure does not include controller NEMA 1 Steel Encolsure with vibration mounts 11.5 x 11.5 x 8.5 inches
$123.88

Current Transformer 100:5 Amp CT

Current Transformer 100:5 Amp CT
CT, 100:5, 100A, 1.1inch ID
$24.95


ACC87943 E-Stop, 20A 1 NC + 1 NO

ACC87943 E-Stop, 20A 1 NC + 1 NO
Universal Emergency Stop button, 20A 1 NC + 1 NO
$59.95

800:5 Donut with 2.88" Hole

800:5 Donut with 2.88" Hole
CTC800L48 - 800:5 Amp CT / Donut with 2.88" Hole
$47.95

CT Donut 2.5" 500:5

CT Donut 2.5" 500:5
500A:5A Current Transformer 2.5" Opening in the center   If out of stock, see other options here
$39.95

3034572-A 5/8" Mag Pickup, Cummins Type

3034572-A 5/8" Mag Pickup, Cummins Type
Replacement 5/8" Mag Pickup for Cummins 3034572
$44.95

ACC0109, Enclosure for RA-400

ACC0109, Enclosure for RA-400
8x8x4 Metal Enclosure for RA400
$56.94


Replacement MX321 Regulator for Stamford E000-23212

Replacement MX321 Regulator for Stamford E000-23212
After-market Regulator for Stamford / Newage.
$329.00

Governor Speed Control for Barber Colman, Woodward, Cummins

Governor Speed Control for Barber Colman, Woodward, Cummins
Our model ESC2301-A universal 15 amp electronic governor controller replaces many part numbers for Barber Colman, Woodward, Cummins, Onan, and many others!  This "one size fits most"...
$279.00  $199.00
Save: 29% off

Sender, 280F, M14x1.5 threads, for Dynagen etc.

Sender, 280F, M14x1.5 threads, for Dynagen etc.
This temperature sender is compatible with Dynagen TG410, TG350, GSC300, and GSC400. High Range Temperature Sender 100-280F and 140-320F   M14x1.5 Metric threads
$20.60

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our PC...
$424.00


Dynagen ACC0045, Current Transformer 100:5 Amp

Dynagen ACC0045, Current Transformer 100:5 Amp
Current Transformer, 10KV, 100A:5A If out of stock see other options here
$29.97

GSC300 Auto Start Engine Control Module for Generators, Engines

GSC300 Auto Start Engine Control Module for Generators, Engines
Usually in stock  to ship right away! Computer Programmable The GSC300 can be programmed with our easy-to-use PC software interface (extra cost option) that allows customization of messaging;...
$349.00  $261.74
Save: 25% off

24 Volt Relay # RLY0017 for ES52 and ES51 Dynagen Control

24 Volt Relay # RLY0017 for ES52 and ES51 Dynagen Control
These heavy-duty 24VDC relays must be installed in the Dynagen ES51 or ES52 series engine controller for 24V DC engines or generators.  This is Dynagen Accessory # RLY0017. 24V Mini Cube Relay...
$8.99

Basic Harness for GSC400

Basic Harness for GSC400
8ft Harness Starter Kit (AC Current Sensing, Digital Input, and Analog Input Cables) for the GSC400
$59.95

12 Volt Relay # RLY0013 for ES52 and ES51 Dynagen Control

12 Volt Relay # RLY0013 for ES52 and ES51 Dynagen Control
These heavy-duty 12VDC relays must be installed in the Dynagen ES51 or ES52 series engine controller for 12V DC engines or generators.  This is Dynagen Accessory # RLY0013.
$7.99


Dynagen DWG1476, TG Main I/O Starter Harness

Dynagen DWG1476, TG Main I/O Starter Harness
To be used in applications  not  utlizing the RP100-VM RelayPak option. 3 SW IN, 3 SW OUT, 3 Sensors - 4'
$22.98

Dynagen ACC0046, Current Transformer 200:5 Amp

Dynagen ACC0046, Current Transformer 200:5 Amp
Dynagen 200A:5A Current Transformer If out of stock see other options here
$29.97

6188000 Din Mount Kit for Time Switches

6188000 Din Mount Kit for Time Switches
6188000 Din Mount Kit for Time Switch.  Fits the following Clocks: TA0016 TA0019 TA0005 TA4353 The below image is what this part looks like when it is installed to a Exercise Clock:
$14.95

Time Switch, Exercise Clock, Digital 24VAC or 24VDC

Time Switch, Exercise Clock, Digital 24VAC or 24VDC
This quality Time Switch has a Digital LCD display and is powered by 24VAC or 24VDC. Can be used on Most Automatic Transfer Switches like Onan that use 24 volt power . Recommended  Mounting...
$89.95

MSP6724 Mag Pickup 3/4" X 16 UNF replacement

MSP6724 Mag Pickup 3/4" X 16 UNF replacement
This speed sensor fits many  applications for a 3/4" X 16 fine thread, 4 inches long speed sensor. Also fits most generator sets with Cummins B series engines like the following: 4B3.9...
$53.95


CT Donut 1.1" 200:5

CT Donut 1.1" 200:5
If out of stock see other options here
$24.95

TG350 TOUGH Series Digital Genset Control, Dynagen

TG350 TOUGH Series Digital Genset Control, Dynagen
Tough Series - For engines or generators The TOUGH Series® controllers are designed to provide complete control, protection, and engine instrumentation for both standard and electronic CAN Bus...
$389.00  $319.00
Save: 18% off

Dynagen GSC400 Plus Controller for Generator & KPC-1000

Dynagen GSC400 Plus Controller for Generator & KPC-1000
Please note before ordering this part:  The GSC400 has been in production for approximately 13 years, and is a great product to this day. However, because of advances in technology and newer...
$556.44  $498.00
Save: 11% off

3/8" UNF Magnetic Pickup / Speed Sensor for Generator

3/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 3/8" fine threads, 2.5" long. Has 6 foot shielded cable attached. *Replaces the following: Barber Colman DYNT-17200 Generac 82130D  Generac 0 82130D ...
$68.95


ACC0013 Time Switch, Exercise Clock, 12VDC SPST

ACC0013 Time Switch, Exercise Clock, 12VDC SPST
TA0005 Exercise Clock Time Switch, 12VDC SPST Recommended Din Mount Kit: 6188000 Din Mount Kit for Time Switches You can download the program instructions / manual here
$89.95

Dynagen ACC0047, Current Transformer 300:5 Amp

Dynagen ACC0047, Current Transformer 300:5 Amp
Dynagen 300A:5A Current Transformer If out of stock, see other options here
$30.97

5/8" UNF Magnetic Pickup / Speed Sensor for Generator

5/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 5/8" fine threads and nearly 4" long. Has 12" leads attached. Wires can be extended as needed by crimping or soldering to existing wiring. Replaces some...
$69.52

02201581, Battery Charger, 24V 2.5A

02201581, Battery Charger, 24V 2.5A
24v Battery Tender Even though we stock and sell this battery charger, we do recommend our new SENS charger as a superior replacement for this part.  For a few dollars more, you can upgrade...
$137.80

ESD2244-24 Governor Control for 24V Stanadyne & linear actuator

ESD2244-24 Governor Control for 24V Stanadyne & linear actuator
This is a new 24VDC governor control capable of running actuators on a constant speed engine or generator set. Compatible with GAC, Woodward and Barber Colman actuators mounted on top of...
$322.00  $283.36
Save: 12% off


Copyright © 2020 Advanced Service And Parts LLC (A.S.A.P). Powered by Zen Cart | Custom Zen Cart work by ZenExpert