Advanced Service And Parts LLC [home link]
0
717.274.9396
English & Habla Español (Spanish)!



Notice: We will be closed on Thursday November 26 and Friday November 27 for Thanksgiving.
This will delay your order by 1-2 days. Please click here for details.
Thank you to our valued customers for your patronage!

NOTICE: The shipping carriers UPS, FedEx, and USPS have suspended their service guarantees until further notice due to Covid-19, the hurricanes, and the wildfires. Please read more here. For local customers, please read this notice before visiting us.

DWG1478, Magnetic Pickup/J1939 Interface Harness

$15.98

1497
  • Part #: DWG1478
  • 16 Units in Stock

    If you are using this harness with J1939 application (eg. Engine ECM or electronic governor) or CANBUS, you will need to use 2) 120 OHm resistors:  one at the dynagen control and one at the terminating end of the harness.  The only exception is if your engine ECM already has a built-in 120 Ohm resistor.  We recommend this part:  ACC0154.

  • Part #: DWG1478
  • 16 Units in Stock
  • Manufactured by: Dynagen
Manufactured by: Dynagen Product ID: 1497 $15.98New


Items you may also be interested in... (Notice: This is an auto-generated list and these items may or may not fit your application. Use discretion / contact us if unsure.)

Snap-on RelayPak Option, Dynagen

Snap-on RelayPak Option, Dynagen
Snap-on RelayPak Option The RelayPak is socketed to accept four industry standard cube relays. When installed, the RelayPak (RP-100*) eliminates the need to mount and wire external slave relays for...
$42.96

DWG1479, 3-Phase AC Volts Harness (Gen or Mains)

DWG1479, 3-Phase AC Volts Harness (Gen or Mains)
4 foot May also be known as DWG1479R1.0
$14.99

Dynagen DWG1477, TG Advanced IO Harness

Dynagen DWG1477, TG Advanced IO Harness
 2 SW IN, 3 SW OUT, 1 Universal Sensor, 4'
$16.98

DWG1518, Harness, AC Current Sensing, TG Series

DWG1518, Harness, AC Current Sensing, TG Series
3 Phase AC Current Harness for the TG410 4'
$14.99

Dynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus

Dynagen DWG1522, 4' J1939 TG Mag/CANbus/Modbus
Mag / CANbus / Modbus Harness for the Dynagen TG Series, 4 foot  Note:  This harness comes with quantity 2) 120 Ohm loose resistors. However, we have an option that is easier to install, in...
$25.97


DWG1475, Main I/O Starter Harness for Relay Pack (3 SW IN, 3 SW

DWG1475, Main I/O Starter Harness for Relay Pack (3 SW IN, 3 SW
For applications that utlize the RP100-VM RelayPak option.   - 3 SW In - 3 SW OUT - 3 Sensors - Power - 4'
$25.97

TG410 TOUGH Series Digital Genset Control, DynaGen

TG410 TOUGH Series Digital Genset Control, DynaGen
Tough Series - For engines or generators The TOUGH series controllers are designed to provide complete control, protection and engine instrumentation for both standard and electronic CAN Bus engines...
$499.00  $412.59
Save: 17% off

Dynagen DWG1476, TG Main I/O Starter Harness

Dynagen DWG1476, TG Main I/O Starter Harness
To be used in applications  not  utlizing the RP100-VM RelayPak option. 3 SW IN, 3 SW OUT, 3 Sensors - 4'
$22.98

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers
You will need 3 of these to change your TG or GSC series controllers to 24 volt operation. 24V Cube Relay RLY0054 replaces:  Part # RLY0043 Part # AZ9731C24DC3E
$8.99


Dynagen ACC0099, Temp. Sender, Datcon 02025-00, 1/2"NPT

Dynagen ACC0099, Temp. Sender, Datcon 02025-00, 1/2"NPT
Dynagen ACC0099 / Datcon 02025-00, Temperature Sender Specs:  140-320 degrees F, 1/2 " National Pipe Threads 
$23.98

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen
NPTF Temp Sender. 280F, 1/8" - 27 NPTF Fits all Dynagen controllers with digital display.  
$13.99

CT Donut 2.5" 500:5

CT Donut 2.5" 500:5
500A:5A Current Transformer 2.5" Opening in the center   If out of stock, see other options here
$39.95

ACC0109, Enclosure for RA-400

ACC0109, Enclosure for RA-400
8x8x4 Metal Enclosure for RA400
$56.94


Hotstart TPS181GT10-000 Block Heater, 120V

Hotstart TPS181GT10-000 Block Heater, 120V
Compact 1800 watt, 120 volt Tank Heater with thermostat - High Impact Plastic. Ideal coolant heater for Generator sets. Standard heater for Onan, Kohler, Generac, Olympian, Cat, and many other...
$119.95

TG350 TOUGH Series Digital Genset Control, Dynagen

TG350 TOUGH Series Digital Genset Control, Dynagen
Tough Series - For engines or generators The TOUGH Series® controllers are designed to provide complete control, protection, and engine instrumentation for both standard and electronic CAN Bus...
$389.00  $319.00
Save: 18% off

ACC0108-A, Oil Sender Replacement for Dynagen

ACC0108-A, Oil Sender Replacement for Dynagen
 Compatable with all Dynagen controllers that use an oil sender to display oil pressure on the digital panel ( GSC300, GSC400, TG350 & TG410).  Rated 0-100 psi. Suitable...
$39.98

RA400-LS, Rmt Annun RA-400 for GSC400 and TG410

RA400-LS, Rmt Annun RA-400 for GSC400 and TG410
RA400 User Manual Data Sheet Suggested Accessories: The enclosure will not be included, order ACC0109 If using with the TG410, order DWG1522 If using with the GSC400, order DWG1454R1.4 If...
$541.46

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our PC...
$424.00


ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410
We are now substituting this part to the ACC0108-A which has the same specs.  This may no longer be readily available on the shelf.  If you still require this part, there will be a lead...
$84.95

ENC0084, Enclosure, Dynagen TG Series 11.5x11.5x8.5"

ENC0084, Enclosure, Dynagen TG Series 11.5x11.5x8.5"
Enclosure does not include controller NEMA 1 Steel Encolsure with vibration mounts 11.5 x 11.5 x 8.5 inches
$123.88

Dynagen ACC0046, Current Transformer 200:5 Amp

Dynagen ACC0046, Current Transformer 200:5 Amp
Dynagen 200A:5A Current Transformer If out of stock see other options here
$29.97

Basic Harness for GSC400

Basic Harness for GSC400
8ft Harness Starter Kit (AC Current Sensing, Digital Input, and Analog Input Cables) for the GSC400
$59.95

Dynagen DWG1410, Pre-Crimped Wires, 5'

Dynagen DWG1410, Pre-Crimped Wires, 5'
Extra Pre-Crimped Wires Package of 5 5 foot length
$30.97


Basler AVC63-4 Voltage Regulator, Genuine AVR

Basler AVC63-4 Voltage Regulator, Genuine AVR
New Genuine Basler AVC63-4 Voltage Regulator input power & sensing 190-240 Vac Output 63 Vdc, 4 Amps Exact equal for PowerTech PT# 06REG634AVC  Basler Voltage Regulator 63-4 AVC NOTE:...
$267.00  $219.95
Save: 18% off

ENC0080, Enclosure, Dynagen TG Series 8x8x4"

ENC0080, Enclosure, Dynagen TG Series 8x8x4"
NEMA 1 Steel Encolsure with vibration mounts
$98.90

3/8" UNF Magnetic Pickup / Speed Sensor for Generator

3/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 3/8" fine threads, 2.5" long. Has 6 foot shielded cable attached. *Replaces the following: Barber Colman DYNT-17200 Generac 82130D  Generac 0 82130D ...
$68.95

5/8" UNF Magnetic Pickup / Speed Sensor for Generator

5/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 5/8" fine threads and nearly 4" long. Has 12" leads attached. Wires can be extended as needed by crimping or soldering to existing wiring. Replaces some...
$69.52

DynaGen ES52 Auto Start Module for Generator, Engine

DynaGen ES52 Auto Start Module for Generator, Engine
This is the best automatic engine control of it's kind for generators, pumps, or other unattended engine applications, now with a FIVE YEAR WARRANTY! Attn: Dealers, generator repair shops,...
$298.00  $249.95
Save: 16% off


Copyright © 2020 Advanced Service And Parts LLC (A.S.A.P). Powered by Zen Cart | Custom Zen Cart work by ZenExpert