Advanced Service And Parts LLC [home link]
0
1.800.630.1230
English & Espaol (Spanish)!

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

$8.99

877
  • Part #: RLY0054
  • 30 Units in Stock

    You will need 3 of these to change your TG or GSC series controllers to 24 volt operation.

     

     

     

    RLY0043

  • Part #: RLY0054
  • 30 Units in Stock
  • Manufactured by: Dynagen
Manufactured by: Dynagen Product ID: 877 $8.99New



You might also like...

Dynagen GSC400 Plus Controller for Generator & KPC-1000

Dynagen GSC400 Plus Controller for Generator & KPC-1000
Please note before ordering this part:  The GSC400 has been in production for approximately 13 years, and is a great product to this day. However, because of advances in technology and newer...
$556.44

Basic Harness for GSC400

Basic Harness for GSC400
5ft Harness Starter Kit (AC Current Sensing, Digital Input, and Analog Input Cables)
$55.94

Dynagen DWG1477, Advanced IO Harness

Dynagen DWG1477, Advanced IO Harness
 2 SW IN, 3 SW OUT, 1 Universal Sensor
$16.98

Snap-on RelayPak Option, Dynagen

Snap-on RelayPak Option, Dynagen
Snap-on RelayPak Option The RelayPak is socketed to accept four industry standard cube relays. When installed, the RelayPak (RP-100*) eliminates the need to mount and wire external slave relays for...
$42.96


3/8" UNF Magnetic Pickup / Speed Sensor for Generator

3/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 3/8" fine threads, 2.5" long. Has 6 foot shielded cable attached. *Replaces the following: Barber Colman DYNT-17200 Generac 82130D / 0 82130D Kohler...
$64.95

6188000 Din Mount Kit for Time Switches

6188000 Din Mount Kit for Time Switches
6188000 Din Mount Kit for Time Switch.  Fits the following Clocks: TA0016 TA0019 TA0005 TA4353 The below image is what this part looks like when it is installed to a Exercise Clock:
$14.95

ACC0013 Time Switch, Exercise Clock, 12VDC SPST

ACC0013 Time Switch, Exercise Clock, 12VDC SPST
TA0005 Exercise Clock Time Switch, 12VDC SPST Recommended Din Mount Kit: 6188000 Din Mount Kit for Time Switches   The below image is what this part looks like with that Din Mount Kit installed:
$89.95

TG350 TOUGH Series Digital Genset Control, Dynagen

TG350 TOUGH Series Digital Genset Control, Dynagen
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our...
$389.00  $319.00
Save: 18% off


TG410 TOUGH Series Digital Genset Control, DynaGen

TG410 TOUGH Series Digital Genset Control, DynaGen
Tough Series - For engines or generators The TOUGH series controllers are designed to provide complete control, protection and engine instrumentation for both standard and electronic CAN Bus engines...
$499.00  $412.59
Save: 17% off

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen
NPTF Temp Sender. 280F, 1/8" - 27 NPTF Fits all Dynagen controllers with digital display.  
$16.49


ACC0108-A, Oil Sender Replacement for Dynagen

ACC0108-A, Oil Sender Replacement for Dynagen
 Compatable with all Dynagen controllers that use an oil sender to display oil pressure on the digital panel ( GSC300, GSC400, TG350 & TG410).  Rated 0-100 psi. Suitable...
$39.98

Dynagen ACC0047, Current Transformer 300:5 Amp

Dynagen ACC0047, Current Transformer 300:5 Amp
Dynagen 300A:5A Current Transformer If out of stock, see other options here
$30.97

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410
We are now substituting this part to the ACC0108-A which has the same specs.  This may no longer be readily available on the shelf.  If you still require this part, there will be a lead...
$77.92

5/8" UNF Magnetic Pickup / Speed Sensor for Generator

5/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 5/8" fine threads and nearly 4" long. Has 12" leads attached. Wires can be extended as needed by crimping or soldering to existing wiring. Replaces some...
$62.95


Dynagen ACC0046, Current Transformer 200:5 Amp

Dynagen ACC0046, Current Transformer 200:5 Amp
Dynagen 200A:5A Current Transformer If out of stock see other options here
$29.97

Governors America"GAC" ESD2244-24 Control, 24V

Governors America"GAC" ESD2244-24 Control, 24V
This is a new 24VDC governor control capable of running actuators on a constant speed engine or generator set. Compatible with Woodward and Barber Colman actuators mpounted on top of Stanadyne...
$310.00  $259.95
Save: 16% off


3034572-A 5/8" Mag Pickup, Cummins Type

3034572-A 5/8" Mag Pickup, Cummins Type
Replacement 5/8" Mag Pickup for Cummins 3034572
$44.95


Model GSC400-PGMR Dynagen (Programmer Kit for GSC400)

Model GSC400-PGMR Dynagen (Programmer Kit for GSC400)
This is the software & cable kit to program the GSC400 series with your laptop or any compatible PC. Please note:  As the GSC400 is being replaced by the TG410 due to advancements in...
$195.00

Netbiter EC150 Remote Monitor for Generators & Equipment

Netbiter EC150 Remote Monitor for Generators & Equipment
Excellent to monitor your Generator when used with Dynagen TG350, TG410, and GSC400! The Netbiter EC150 communication gateway connects to field equipment via several connection methods: Serial...
$629.00

ES52 Auto Start Module for Generator, Engine (AS52, AS51, ES51)

ES52 Auto Start Module for Generator, Engine (AS52, AS51, ES51)
This is the best automatic engine control of it's kind for generators, pumps, or other unattended engine applications, now with a FIVE YEAR WARRANTY! Attn: Dealers, generator repair shops,...
$298.00  $229.95
Save: 23% off

GSC300 Auto Start Engine Control Module for Generators, Engines

GSC300 Auto Start Engine Control Module for Generators, Engines
Usually in stock  to ship right away! Computer Programmable The GSC300 can be programmed with our easy-to-use PC software interface (extra cost option) that allows customization of messaging;...
$349.00  $261.74
Save: 25% off


GSC300USBPGMR Software & USB Cable for Dynagen GSC300 Control

GSC300USBPGMR Software & USB Cable for Dynagen GSC300 Control
 This Dynagen GSC300-PGMR programmer kit allows you to customize your GSC300 to the exact settings you need. See manual:  GSC300 Configurator Software Manual v2.1  (Adobe Acrobat PDF,...
$311.69

Universal AVR replaces ADVR648

Universal AVR replaces ADVR648
LOW PRICE / High Quality!  Our ADVR635 universal automatic generator voltage regulator works on exciter fields as low as 9 ohms with or without brushes. Note: Brush type machines may require...
$169.00  $149.00
Save: 12% off


Copyright © 2019 Advanced Service And Parts LLC (A.S.A.P). Powered by Zen Cart | Custom Zen Cart work by ZenExpert