Voltage Regulator replaces some Honda, Kubota GL6500S, etc.

Replaces Kubota Part # 18961-02800.

Voltage regulator for some small generators made by Kubota, Yamaha, Honda, Kawasaki, Denyo, Sawafuji and others.  Contact us with any questions.

We believe this will also replace Honda # 32350-898-003.  We successfully replaced the AVR in the picture below with this model.  Notice the capacitor was seperate on the original shown, and the VR030 has the capacitor "built in".  The connector plugs in the same.

We are reasonably sure that this is also a replacement for KUBOTA # 18715-02800.  It looks identical and bolts up the same.

• KUBOTA Low Boy GL6500S and likely AV6500-B ~ Kubota Part # 18961-02800
  
• YAMAHA EDL6500S
  
• HONDA EP-1800, EM2200, EC2500, EP-2500, *EX800, but different shape
  
• KAWASAKI GE-1400, GE-2200, GA-230, GA-2900
  
• SUZUKI SV-1400, SV-1400LD, SV-2200L, SV-2200LD
  
• SAWAFUJI SH-1800, SH-2600
  
• MARUYAMA ME-1800, ME-2600
  
• ELEPAQ PH-1800, PH-2600
  

possibly others...

Specifications:
Sensing Input Voltage 18 - 24 VAC, 1 phase 2 wire

Voltage Regulation < ±2% (within 4% engine governing)

Power Input: Voltage 60 - 90 VAC, 1 phase 2 wire

Voltage Build Up Residual volts at AVR terminal >1 VAC
Excitation Output Voltage 5 - 85 VDC

Voltage Adjust Range 110 VAC ± 15%
Current: Continuous 3A, Intermittent 4A for 60 sec

Thermal Drift 0.05% per change in AVR ambient
Resistance Minimum 25 Ω

Environment
Vibration 1.5G @ 5 - 30 Hz 5.0G @ 30 - 500 Hz Relative Humidity < 95%
Operating Temperature -40 ~ 60 C
Storage Temperature -40 ~ 85 C