Advanced Service And Parts LLC [home link]
0
1.800.630.1230
English & Espaol (Spanish)!

Model GSC400-PGMR Dynagen (Programmer Kit for GSC400)

$169.95

1279
  • Part #: GSC400-PGMR
  • 2 Units in Stock

    This is the software & cable kit to program the GSC400 series with your laptop or any compatible PC.

    Please note:  as the GSC400 is being replaced by the TG410, due to advancements in technology, we will no longer have this programmer readily available on the shelf.  If you need this product, please contact us for a lead time.  If you place an order online, be aware that it will take longer for this programmer to ship, as we will need to order it first. 

    Every setting of the feature-rich GSC400 is easily configured with its powerful, yet easy-to-use PC-based software interface.  Below are most of the functions available to you:

    Sensor Inputs

    • (Sender/Switch or J1939)
    • High Engine Temp
    • Low Oil Pressure
    • Fuel Level
    • Oil Level
    • Fuel in Basin
    • Low Engine Temp

    Switched Output Functions (Select up to 9)

    • Warm-up
    • Energize-to-Stop
    • Pre-heat
    • Cool-down
    • Overcrank
    • High Temp Failure/Warning
    • Low Oil Failure/Warning
    • Underspeed Failure/Warning
    • Overspeed Failure/Warning
    • Low Fuel Failure/Warning
    • Battery Failure/Warning
    • Low Coolant Failure/Warning
    • Not-in-Auto
    • General Failure
    • Crank Rest
    • Engine Running
    • Engine Cranking
    • Exerciser Alarm
    • Battery Recharge Alarm
    • Under Voltage Warning
    • Over Voltage Warning
    • Over Current Warning
    • Fuel-in-Basin Warning
    • Voltage Regulator
    • Low Temperature
    • Backlight
    • Auxiliary Warning
    • Maintenance Timer
    • System Ready
    • Common Fault
    • Dummy Load
    • High Fuel Level
    • Current Latch
    • User Configurable
    • Warning 1 & 2
    • User Configurable
    • Failure 1 & 2

    Timers

    • Pre-heat, Mid-heat & Post-heat
    • Delay-to-Start
    • Warm-up & Cool-down
    • Energize-to-Stop
    • Programmable Engine Exerciser

    Battery Functions

    • Low/High Battery
    • Warning & Failure
    • Autostart on Low
    • Battery Function

    AC Functions

    • Overspeed/Underspeed Warning & Failure
    • Over/Under Frequency Warning & Failure
    • Over/Under Voltage
    • Warning & Failure
    • Over Current Warning & Failure
    • AC Secondary Crank Disconnect

    Switched Input Functions (Select up to 8)

    • Emergency Stop
    • Low Air Pressure
    • Low Hydraulic Pressure
    • Low Oil Pressure
    • EPS Supplying Load
    • Alarm Silence
    • Low Coolant
    • Voltage Topology Select 1 & 2
    • Idle Mode
    • Start/Stop
    • Charger Fault 1 & 2
    • High Fuel Level
    • Auxiliary Failure & Warning
    • User Configurable Warning 1 & 2
    • User Configurable Failure 1 & 2
  • Part #: GSC400-PGMR
  • 2 Units in Stock
  • Manufactured by: Dynagen
Manufactured by: Dynagen Product ID: 1279 $169.95New



You might also like...

Charger, SENS MicroGenius

Charger, SENS MicroGenius
The Micro Genius G22-06-LWD has been replaced by the Micro Genius2...If you were looking for the original Micro Genius, we recommend the M3-22-1210-E Genius variant in its place. Rugged,...
$598.00

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers
You will need 3 of these to change your TG or GSC series controllers to 24 volt operation.       RLY0043
$7.95

3034572-A 5/8" Mag Pickup, Cummins Type

3034572-A 5/8" Mag Pickup, Cummins Type
Replacement 5/8" Mag Pickup for Cummins 3034572
$44.95

Snap-on RelayPak Option, Dynagen

Snap-on RelayPak Option, Dynagen
Snap-on RelayPak Option The RelayPak is socketed to accept four industry standard cube relays. When installed, the RelayPak (RP-100*) eliminates the need to mount and wire external slave relays for...
$48.00


Dynagen DWG1477, Advanced IO Harness

Dynagen DWG1477, Advanced IO Harness
 2 SW IN, 3 SW OUT, 1 Universal Sensor
$19.00


TG410 TOUGH Series Digital Genset Control, DynaGen

TG410 TOUGH Series Digital Genset Control, DynaGen
Tough Series - For engines or generators The TOUGH series controllers are designed to provide complete control, protection and engine instrumentation for both standard and electronic CAN Bus engines...
$499.00  $399.00
Save: 20% off

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410
We are now substituting this part to the ACC0108-A which has the same specs.  This may no longer be readily available on the shelf.  If you still require this part, there will be a lead...
$62.68

Netbiter EC150 Remote Monitor for Generators & Equipment

Netbiter EC150 Remote Monitor for Generators & Equipment
Excellent to monitor your Generator when used with Dynagen TG350, TG410, and GSC400! The Netbiter EC150 communication gateway connects to field equipment via several connection methods: Serial...
$629.00


ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen
NPTF Temp Sender. 280F, 1/8" - 27 NPTF Fits all Dynagen controllers with digital display.  
$16.49

Basic Harness for GSC400

Basic Harness for GSC400
5ft Harness Starter Kit (AC Current Sensing, Digital Input, and Analog Input Cables)
$47.00

Dynagen GSC400 Plus Controller for Generator & KPC-1000

Dynagen GSC400 Plus Controller for Generator & KPC-1000
Please note before ordering this part:  The GSC400 has been in production for approximately 13 years, and is a great product to this day. However, because of advances in technology and newer...
$549.00  $489.00
Save: 11% off


Universal AVR replaces ADVR648

Universal AVR replaces ADVR648
LOW PRICE / High Quality!  Our ADVR635 universal automatic generator voltage regulator works on exciter fields as low as 9 ohms with or without brushes. Note: Brush type machines may require...
$169.00  $149.00
Save: 12% off

Exercise Clock, Replaces Kohler GM64027, Digital 120VAC

Exercise Clock, Replaces Kohler GM64027, Digital 120VAC
Our Digital 120 volt TA4353 Time Switch can be used to replace electronic, or older mechanical timers to exercise your generator set. Replaces Kohler GM64027 Programmable Exerciser (120V) Can also be...
$89.95

AVR replaces Kohler C-255670 regulator

AVR replaces Kohler C-255670 regulator
Exact replacement for Kohler C-255670 AVR. Fits most Kohler Fast Response Generators. Genuine Kohler also available for higher cost: Kohler C-255670 Voltage Regulator, Genuine Also replaces these...
$146.00


Copyright © 2019 Advanced Service And Parts LLC (A.S.A.P). Powered by Zen Cart | Custom Zen Cart work by ZenExpert