Advanced Service And Parts LLC [home link]
0
1.800.630.1230
English & Espaol (Spanish)!

Dynagen DWG1477, Advanced IO Harness

$19.00

1498
  • Part #: DWG1477
  • 16 Units in Stock

     2 SW IN, 3 SW OUT, 1 Universal Sensor

  • Part #: DWG1477
  • 16 Units in Stock
  • Manufactured by: Dynagen
Manufactured by: Dynagen Product ID: 1498 $19.00New



You might also like...

Snap-on RelayPak Option, Dynagen

Snap-on RelayPak Option, Dynagen
Snap-on RelayPak Option The RelayPak is socketed to accept four industry standard cube relays. When installed, the RelayPak (RP-100*) eliminates the need to mount and wire external slave relays for...
$48.00


TG410 TOUGH Series Digital Genset Control, DynaGen

TG410 TOUGH Series Digital Genset Control, DynaGen
Tough Series - For engines or generators The TOUGH series controllers are designed to provide complete control, protection and engine instrumentation for both standard and electronic CAN Bus engines...
$499.00  $399.00
Save: 20% off

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers

24 Volt Relay (AZ9731C24DC3E) for TG and GSC Dynagen Controllers
You will need 3 of these to change your TG or GSC series controllers to 24 volt operation.       RLY0043
$7.95

Dynagen ACC0047, Current Transformer 300:5 Amp

Dynagen ACC0047, Current Transformer 300:5 Amp
Dynagen 300A:5A Current Transformer If out of stock, see other options here
$30.95


ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen

ACC0027 Temp Sender, Hi Temp, 1/8"NPT for Dynagen
NPTF Temp Sender. 280F, 1/8" - 27 NPTF Fits all Dynagen controllers with digital display.  
$16.49

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410

ACC0108 Oil Sender for Dynagen GSC300, GSC400, TG350 & TG410
We are now substituting this part to the ACC0108-A which has the same specs.  This may no longer be readily available on the shelf.  If you still require this part, there will be a lead...
$62.68

Dynagen ACC0046, Current Transformer 200:5 Amp

Dynagen ACC0046, Current Transformer 200:5 Amp
Dynagen 200A:5A Current Transformer If out of stock see other options here
$29.95

TG350 TOUGH Series Digital Genset Control, Dynagen

TG350 TOUGH Series Digital Genset Control, Dynagen
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our...
$389.00  $319.00
Save: 18% off


RA400-LS, Rmt Annun RA-400 for GSC400 and TG410

RA400-LS, Rmt Annun RA-400 for GSC400 and TG410
RA400 User Manual Data Sheet Suggested Accessories: The enclosure will not be included, order ACC0109 If using with the TG410, order DWG1522 If using with the GSC400, order DWG1454R1.4 ...
$445.50


Sender, 280F, M14x1.5 threads, for Dynagen etc.

Sender, 280F, M14x1.5 threads, for Dynagen etc.
This temperature sender is compatible with Dynagen TG410, TG350, GSC300, and GSC400. High Range Temperature Sender 100-280F and 140-320F   M14x1.5 Metric threads
$20.60

ACC0109, Enclosure for RA-400

ACC0109, Enclosure for RA-400
8x8x4 Metal Enclosure for RA400
$39.95

ACC0108-A, Oil Sender Replacement for Dynagen

ACC0108-A, Oil Sender Replacement for Dynagen
 Compatable with all Dynagen controllers that use an oil sender to display oil pressure on the digital panel ( GSC300, GSC400, TG350 & TG410).  Rated 0-100 psi. Suitable...
$39.98


5/8" UNF Magnetic Pickup / Speed Sensor for Generator

5/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 5/8" fine threads and nearly 4" long. Has 12" leads attached. Wires can be extended as needed by crimping or soldering to existing wiring. Replaces some...
$62.95

3/8" UNF Magnetic Pickup / Speed Sensor for Generator

3/8" UNF Magnetic Pickup / Speed Sensor for Generator
This quality mag pick-up has 3/8" fine threads, 2.5" long. Has 6 foot shielded cable attached. *Replaces the following: Barber Colman DYNT-17200 Generac 82130D / 0 82130D Kohler...
$62.95

RLY0053, 12VDC Relay for TG and GSC Dynagen Controllers

RLY0053, 12VDC Relay for TG and GSC Dynagen Controllers
Relay, 12VDC, Hasco for Dynagen You will need 3 of these to change your TG or GSC series controllers to 12 volt operation.
$6.95

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen

TG350AMF TOUGH Series Control Auto Main Failure, DynaGen
Tough Series - For engines or generators All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our PC...
$424.00


Basler AVC63-4 Voltage Regulator, Genuine AVR

Basler AVC63-4 Voltage Regulator, Genuine AVR
New Genuine Basler AVC63-4 Voltage Regulator input power & sensing 190-240 Vac Output 63 Vdc, 4 Amps Exact equal for PowerTech PT# 06REG634AVC  Basler Voltage Regulator 63-4 AVC NOTE:...
$267.00  $214.95
Save: 19% off

3034572-A 5/8" Mag Pickup, Cummins Type

3034572-A 5/8" Mag Pickup, Cummins Type
Replacement 5/8" Mag Pickup for Cummins 3034572
$44.95

Model GSC400-PGMR Dynagen (Programmer Kit for GSC400)

Model GSC400-PGMR Dynagen (Programmer Kit for GSC400)
This is the software & cable kit to program the GSC400 series with your laptop or any compatible PC. Please note:  as the GSC400 is being replaced by the TG410, due to advancements in...
$169.95


Netbiter EC150 Remote Monitor for Generators & Equipment

Netbiter EC150 Remote Monitor for Generators & Equipment
Excellent to monitor your Generator when used with Dynagen TG350, TG410, and GSC400! The Netbiter EC150 communication gateway connects to field equipment via several connection methods: Serial...
$629.00

Propane / Natural Gas Solenoid Valve, 3/4" NPT, N/C

Propane / Natural Gas Solenoid Valve, 3/4" NPT, N/C
12 volt general purpose solenoid valve for Natural gas or LP Gas vapor, etc. Ideal for generator sets and other engines or applications within the specs shown. Quality Jefferson valve manufactured...
$121.65  $99.98
Save: 18% off


Copyright © 2019 Advanced Service And Parts LLC (A.S.A.P). Powered by Zen Cart | Custom Zen Cart work by ZenExpert